Q12 series 12 mm panel mount LED indicators DISTINCTIVE FEATURES 8 mm colored diffused epoxy lens or 8 mm water clear super bright LEDs 2VDC - 220VAC (2.8 x 0.8) solder lug/faston terminals, pins or (200 mm long) wire terminations ENVIRONMENTAL SPECIFICATIONS IP67 sealing option (EN60529) Operating & Storage Temperature Range: Rear plastic body: -30 C to +65 C ( 22 F to +149 F) Rear epoxy body: -40 C to +85 C ( 40 F to +185 F) GENERAL SPECIFICATIONS Max Reverse Voltage: 5 V Viewing Angle: 30100 (dependant on model) Life Expectancy: 100,000 hours Torque: 75 cNm Maximum panel thickness 7 mm MATERIALS Plated brass bezel finished in bright chrome, black or satin grey and moulded polycarbonate rear body MOUNTING The company reserves the right to change specifications without notice. All LED characteristics are dependent upon environmental conditions. Therefore published data should be considered nominal and subject to variations. 1 IND-Q12-2001(R1) LED INDICATORSQ12 series 12 mm panel mount LED indicators ELECTRICAL SPECIFICATIONS Voltage Operating Voltage Operating Current STANDARD LED INTENSITY (Typical All (Min to Max) LED COMPONENT SPECIFICATIONS Types) Prominent and Flush Forward Voltage 02 (No Resistor) 1.8 to 3.3 VDC 20 mA max Recessed 6 VDC 5.4 to 6.6 VDC 20 mA HE Red 350 mcd N/A 2.0 V Green 60 mcd N/A 2.2 V 12 VDC 10.8 to 13.2 VDC 20 mA Yellow 50 mcd N/A 2.1 V 24 VDC 21.6 to 26.4 VDC 20 mA Blue 800 mcd 330 mcd 3.3 V (Flush : 3.1 V) 28 VDC 25.2 to 30.8 VDC 20 mA White 1,200 mcd 1.560 mcd 3.3 V (Flush : 3.1 V) 110 VAC 99 to 121 VAC 6 mA Orange 100 mcd N/A 2.2 V 220 VAC 207 to 235 VAC 3 mA Bi-color (Typical) 20/10 mcd N/A 2.0 V/2.2 V (Red/Green) * Customer to supply resistor for desired operating current. Tri-color (Typical) 80/15/13 mcd N/A 2.0 V/2.2 V/2.1 V (Red/Green/Yellow) Bi-color - The color is changed by reversing the polarity of the supply voltage. Tri-color - The indicator has red and green LEDs, when both connected yellow is produced. SUPER BRIGHT LED INTENSITY LED COMPONENT SPECIFICATIONS Prominent and Flush Forward Voltage Recessed HE Red 3,000 mcd N/A 2.2 V Green 8,000 mcd N/A 3.3 V Yellow 1,100 mcd N/A 2.0 V Blue 1,500 mcd N/A 3.3 V White 1,200 mcd N/A 3.3 V Orange 2,000 mcd N/A 2.2 V HYPER BRIGHT LED INTENSITY LED COMPONENT SPECIFICATIONS Prominent and Flush Forward Voltage Recessed HE Red 1,900 mcd 1,120 mcd 2.2 V Green 3,500 mcd 1,560 mcd 3.3 V Yellow 1,600 mcd 1,120 mcd 2.0 V Orange 4,300 mcd 1,120 mcd 2.2 V The operating voltage must not be exceeded by more that 10% as this will result in reduced life expectancy Luminous intensity is measured at 20 mA on a discrete led unless otherwise stated. Luminous intensities and color shades of white LEDs may vary within a batch. Luminous intensity will be reduced with lower operating current. 2 LED INDICATORS