Product data sheet Automation Technology Product description Contacts: 8, Connecting cable 2m, male cable connector M12x1 - RJ45-male connector, shielded, IP67 Area M12-D, M12-X Series 876 X-coding Order number 79 9723 020 08 Illustration Scale drawing Contact arrangement Technical data General values Electrical values Connector design connecting cord Rated voltage 50V AC, 60V DC V Connector locking system bolted Pollution degree 3 Termination crimp, moulded on cable Overvoltage category II Wire gauge (AWG) 4x2xAWG26 Insulating material group II Upper limit temperature 85 C Rated current (40 C) 0,5 A Lower limit temperature -40 C Volume resistivity 15 m EMC compliance shielded Degree of protection IP67 Mechanical operation > 100 Mating cycles Cable data Sheath material PUR green Single-lead insulation PE Material Single-lead structure 8 x 0,14 Cable sheath 6.2 Contact material CuZn (brass) Conductor resistance 14,5/100 m Contact plating Au (gold) Temperature range, moving cable, C from -10 Contact body material PA Temperature range, moving cable, C to 60 Housing material PUR Temperature range, fixed cable, C from -40 Temperature range, fixed cable, C to 85 Bending radius, fixed cable 50 mm Approval 1 UL listed Cable diameter 6.2 Date: 2018-02-05 - Page 1 of 2Product data sheet Automation Technology Product description Contacts: 8, Connecting cable 2m, male cable connector M12x1 - RJ45-male connector, shielded, IP67 Area M12-D, M12-X Series 876 X-coding Order number 79 9723 020 08 Sicherheitshinweise The connectors are designed for use in plant, control system and electrical equipment. The end user is responsible for checking whether the connectors are suitable for use in other applications. Connectors with degree of protection IP 67 and IP 68 are not suitable for use under water. When used outdoors, the connectors must be separately protected against corrosion. For further information about IP degrees of protection refer to Technical support in the Download Centre. To lock the cable connector to the equipment connector, the threaded ring is tightened until it is finger-tight (approx. 50 cNm). Date: 2018-02-05 - Page 2 of 2 Powered by TCPDF (www.tcpdf.org)