Data sheet BMC150 6-axis eCompass Bosch Sensortec BMC150: Data sheet Document revision 1.0 Document release date 14 July 2014 Document number BST-BMC150-DS000-04 Technical reference code(s) 0 273 141 156 Notes Product photos and pictures are for illustration purposes only and may differ from the real products appearance. Datasheet Page 2 eCompass BMC150 BMC150 ECOMPASS WITH 3-AXIS GEOMAGNETIC SENSOR AND 12 BIT 3-AXIS ACCELEROMETER Key features Three-axis magnetic field sensor and 12bit three-axis accelerometer in one package Accelerometer can still be used independently from magnetometer operation 2 Ultra-Small package 14-Pin LGA package, footprint 2.2 2.2mm , height 0.95 mm Digital interface SPI (4-wire, 3-wire), IC, 4 interrupt pins (2 acceleration sensor, 2 magnetic sensor interrupt pins) Low voltage operation V supply voltage range: 1.62V to 3.6V DD V interface voltage range: 1.2V to 3.6V DDIO Flexible functionality Acceleration ranges 2g/4g/8g/16g Acceleration Low-pass filter bandwidths 1 kHz - <8Hz Magnetic field range 1300T (x, y-axis), 2500T (z-axis) Magnetic field resolution of ~0.3T On-chip FIFO Integrated FIFO with a depth of 32 frames On-chip interrupt controller Motion-triggered interrupt-signal generation for - new data (separate for accelerometer and magnetometer) - any-motion (slope) detection - tap sensing (single tap / double tap) - orientation recognition - flat detection - low-g/high-g detection - magnetic Low-/High-Threshold detection Ultra-low power Low current consumption (190A 10 Hz including accelerometer and magnetic sensor in low power preset), short wake-up time, advanced features for system power management Temperature range -40 C +85 C Temperature sensor RoHS compliant, halogen-free Typical applications Tilt-compensated electronic compass for map rotation, navigation and augmented reality 6-axis orientation for gaming Display profile switching Menu scrolling, tap / double tap sensing Pedometer / step counting Free-fall detection Drop detection for warranty logging Advanced system power management for mobile applications Gaming BST-BMC150-DS000-04 Revision 1.0 July 2014 Bosch Sensortec Bosch Sensortec GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. BOSCH and the symbol are registered trademarks of Robert Bosch GmbH, Germany. Note: Specifications within this document are subject to change without notice. Not intended for publication.