TISP7125F3 THRU TISP7180F3, TISP7240F3 THRU TISP7380F3 MEDIUM & HIGH-VOLTAGE TRIPLE ELEMENT BIDIRECTIONAL THYRISTOR OVERVOLTAGE PROTECTORS TISP7xxxF3 (MV, HV) Overvoltage Protector Series Patented Ion-Implanted Breakdown Region D Package (Top View) - Precise DC and Dynamic Voltages T 1 8 G V V DRM (BO) Device 7 NC 2 NU V V NC 3 6 NU 7125F3 100 125 7150F3 120 150 R 45 G 7180F3 145 180 NC - No internal connection. 7240F3 180 240 NU - Non-usable no external electrical connection should be 7260F3 200 260 made to these pins. Specified ratings require connection of pins 5 and 8. 7290F3 220 290 7320F3 240 320 7350F3 275 350 7380F3 270 380 Device Symbol For new designs use 7350F3 instead of 7380F3 T R Planar Passivated Junctions - Low Off-State Current.................................<10 A Rated for International Surge Wave Shapes - Single and Simultaneous Impulses I TSP Waveshape Standard A 2/10 GR-1089-CORE 190 SD7XAB 8/20 IEC 61000-4-5 175 G 10/160 FCC Part 68 110 Terminals T, R and G correspond to the FCC Part 68 alternative line designators of A, B and C 10/700 70 ITU-T K.20/21 10/560 FCC Part 68 50 10/1000 GR-1089-CORE 45 ............................................... UL Recognized Component Description The TISP7xxxF3 series are 3-point overvoltage protectors designed for protecting against metallic (differential mode) and simultaneous longitudinal (common mode) surges. Each terminal pair has the same voltage limiting values and surge current capability. This terminal pair surge capability ensures that the protector can meet the simultaneous longitudinal surge require-ment which is typically twice the metallic surge requirement. How To Order Order As Device Package Carrier Tape and Reel TISP7xxxF3DR-S TI S P 7x xxF3 D , S m al l - out l i n e WARNING Cancer and Reproductive Harm - www.P65Warnings.ca.gov * RoHS Directive 2002/95/EC Jan. 27, 2003 including Annex. Specications are subject to change without notice. Users should verify actual device performance in their specic applications. The products described herein and this document are subject to specic legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf MARCH 1994 - REVISED SEPTEMBER 2008 *RoHS COMPLIANT TISP7xxxF3 (MV, HV) Overvoltage Protector Series Description (continued) Each terminal pair has a symmetrical voltage-triggered thyristor characteristic. Overvoltages are initially clipped by breakdown clamping until the voltage rises to the breakover level, which causes the device to crowbar into a low-voltage on state. This low-voltage on state causes the current resulting from the overvoltage to be safely diverted through the device. The high crowbar holding current helps prevent d.c. latchup as the diverted current subsides.These protectors are guaranteed to voltage limit and withstand the listed lightning surges in both polarities. These medium and high voltage devices are offered in nine voltage variants to meet a range of battery and ringing voltage requirements. They are guaranteed to suppress and withstand the listed international lightning surges on any terminal pair. Similar devices with working voltages of 58 V and 66 V are detailed in the TISP7072F3, TISP7082F3 data sheet. Absolute Maximum Ratings, T = 25 C (Unless Otherwise Noted) A Rating Symbol Value Unit Repetitive peak off-state voltage, 0 C < T < 70 C A 7125F3 100 7150F3 120 7180F3 145 7240F3 180 V V DRM 7260F3 200 7290F3 220 7320F3 240 7350F3 275 7380F3 270 Non-repetitive peak on-state pulse current (see Notes 1 and 2) 1/2 (Gas tube differential transient, 1/2 voltage wave shape) 330 2/10 (Telcordia GR-1089-CORE, 2/10 voltage wave shape) 190 1/20 (ITU-T K.22, 1.2/50 voltage wave shape, 25 resistor) 100 8/20 (IEC 61000-4-5, combination wave generator, 1.2/50 voltage wave shape) 175 10/160 (FCC Part 68, 10/160 voltage wave shape) 110 I A PPSM 4/250 (ITU-T K.20/21, 10/700 voltage wave shape, simultaneous) 95 0.2/310 (CNET I 31-24, 0.5/700 voltage wave shape) 70 5/310 (ITU-T K.20/21, 10/700 voltage wave shape, single) 70 5/320 (FCC Part 68, 9/720 voltage wave shape, single) 70 10/560 (FCC Part 68, 10/560 voltage wave shape) 50 10/1000 (Telcordia GR-1089-CORE, 10/1000 voltage wave shape) 45 Non-repetitive peak on-state current, 0 C < T < 70 C (see Notes 1 and 3) A I TSM A 50 Hz, 1 s 4.3 Initial rate of rise of on-state current, Linear current ramp, Maximum ramp value < 38 A di /dt 250 A/s T Junction temperature T -65 to +150 C J Storage temperature range T -65 to +150 C stg NOTES: 1. Initially, the TISP device must be in thermal equilibrium at the specified T . The impulse may be repeated after the TISP device A returns to its initial conditions. The rated current values may be applied either to the R to G or to the T to G or to the T to R terminals. Additionally, both R to G and T to G may have their rated current values applied simultaneously (In this case the total G terminal current will be twice the above rated current values). 2. See Thermal Information for derated I values 0 C < T < 70 C and Applications Information for details on wave shapes. PPSM A 3. Above 70 C, derate I linearly to zero at 150 C lead temperature. TSM MARCH 1994 - REVISED SEPTEMBER 2008 Specications are subject to change without notice. Users should verify actual device performance in their specic applications. The products described herein and this document are subject to specic legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf.