ACPL-312U-500E Broadcom

ACPL-312U-000E Wide Operating Temperature IGBT Gate Drive 2 with R Coupler Isolation and 2.5 Amp Output Current Data Sheet Lead (Pb) Free RoHS 6 fully compliant RoHS 6 fully compliant options available -xxxE denotes a lead-free product Description Features The ACPL-312U device contains an AlGaAs LED. The LED 2.5 A maximum peak output current is optically coupled to an integrated circuit with a power 2.0 A minimum peak output current output stage. This wide operating temperature optocou- 25 kV/s minimum Common Mode Rejection (CMR) at pler is ideally suited for driving power IGBTs and MOSFETs V = 1500 V CM used in wide operating temperature motor control inverter and DC-DC converters applications. The high 0.5 V maximum low level output voltage (V ) Elimi- OL operating voltage range of the output stage provides the nates need for negative gate drive drive voltages required by gate controlled devices. The I = 5 mA maximum supply current CC voltage and current supplied by these optocouplers make Under Voltage Lock-Out protection (UVLO) with them ideally suited for directly driving IGBTs with ratings hysteresis up to 1200 V/100 A. For IGBTs with higher ratings, the ACPL-312U series can be used to drive a discrete power Wide operating V range: 15 to 30 Volts CC stage which drives the IGBT gate. 500 ns maximum switching speeds 2 Avago R Coupler isolation products provide the rein- Wide temperature range: forced insulation and reliability needed for critical in auto- - -40C to 125C motive and high temperature industrial applications. Safety Approval: Functional Diagram - UL Recognized 3750 Vrms for 1 min. ACPL-312U-000E - CSA - IEC/EN/DIN EN 60747-5-5 Viorm = 630 Vpeak N/ C V 1 8 CC Applications ANODE V 2 7 O IGBT/MOSFET Gate Drive CATHODE V 3 6 O AC and Brushless DC Motor Drives Industrial Inverters Systems N/C V 4 5 EE SHIELD Switching power supplies TRUTH TABLE V - V V - V CC EE CC EE POSITIVE GOING NEGATIVE GOING LED (i.e., TURN-ON) (i.e., TURN-OFF) V O OFF 0 - 30 V 0 - 30 V LOW ON 0 - 11 V 0 - 9.5 V LOW ON 11 - 13.5 V 9.5 - 12 V TRANSITION ON 13.5 - 30 V 12 - 30 V HIGH A 0.1 F bypass capacitor must be connected between pins 5 and 8. CAUTION: It is advised that normal static precautions be taken in handling and assembly CAUTION: It is advised that normal static precautions be taken in handling and assembly of this component to prevent damage and/or degradation which may be induced by ESD. of this component to prevent damage and/or degradation which may be induced by ESD. Ordering Information Options Surface Tape IEC/EN/DIN EN Part Number RoHS Compliant Package Mount Gullwing & Reel 60747-5-5 Quantity -000E DIP 8 X 50 per tube ACPL-312U -300E X X X 50 per tube Gullwing -500E X X X X 1000 per reel To order, choose a part number from the part number column and combine with the desired option from the option column to form an order entry. Example 1: ACPL-312U-500E to order product of gullwing DIP-8 package in Tape and Reel packaging with RoHS compliant. Example 2: ACPL-312U-000E to order product of DIP-8 package in tube packaging with RoHS compliant. Option datasheets are available. Contact your Avago sales representative or authorized distributor for information. Package Outline Drawings ACPL-312U-000E Standard DIP Package 7.62 0.25 9.65 0.25 (0.300 0.010) (0.380 0.010) 8 7 6 5 6.35 0.25 TYPE NUMBER (0.250 0.010) DATE CODE A 312U YYWW 1 2 3 4 1.78 (0.070) MAX. 1.19 (0.047) MAX. + 0.076 0.254 5 TYP. - 0.051 + 0.003) 3.56 0.13 (0.010 4.70 (0.185) MAX. - 0.002) (0.140 0.005) 0.51 (0.020) MIN. 2.92 (0.115) MIN. DIMENSIONS IN MILLIMETERS AND (INCHES). 1.080 0.320 0.65 (0.025) MAX. (0.043 0.013) 2.54 0.25 NOTE: FLOATING LEAD PROTRUSION IS 0.25 mm (10 mils) MAX. (0.100 0.010) LAND PATTERN RECOMMENDATION 9.65 0.25 1.016 (0.040) (0.380 0.010) 8 7 6 5 2 A 312U 6.350 0.25 10.9 (0.430) (0.250 0.010) YYWW 1 2 3 4 2.0 (0.080) 1.27 (0.050) 1.780 9.65 0.25 (0.380 0.010) (0.070) 1.19 MAX. 7.62 0.25 (0.047) (0.300 0.010) MAX. + 0.076 0.254 - 0.051 3.56 0.13 + 0.003) (0.140 0.005) (0.010 - 0.002) 1.080 0.320 0.635 0.25 (0.043 0.013) (0.025 0.010) 12 NOM. 0.635 0.130 2.54 (0.025 0.005) (0.100) BSC DIMENSIONS IN MILLIMETERS (INCHES). LEAD COPLANARITY = 0.10 mm (0.004 INCHES). NOTE: FLOATING LEAD PROTRUSION IS 0.25 mm (10 mils) MAX.