ACPL-3130-300E Broadcom

ACPL-3130/J313, ACNW3130 Very High CMR 2.5 Amp Output Current IGBT Gate Driver Optocoupler Data Sheet Lead (Pb) Free RoHS 6 fully compliant RoHS 6 fully compliant options available -xxxE denotes a lead-free product Description Features High speed response. The ACPL-3130 contains a GaAsP LED while the ACPL-J313 and the ANCW3130 contain an AlGaAs LED. The LED is Very high CMR. optically coupled to an integrated circuit with a power Bootstrappable supply current. output stage. These optocouplers are ideally suited for Safety Approval: driving power IGBTs and MOSFETs used in motor control UL Recognized inverter applications. The high operating voltage range - 3750 V for 1 min. for ACPL-3130/ACPL-J313 of the output stage provides the drive voltages required rms - 5000 V for 1 min. for ACNW3130 by gate controlled devices. The voltage and current rms supplied by these optocouplers make them ideally suited CSA Approval for directly driving IGBTs with ratings up to 1200 V/100 A. IEC/EN/DIN EN 60747-5-5 Approved For IGBTs with higher ratings, the ACPL-3130 series can be - V = 630 V for ACPL-3130 (Option 060) IORM peak used to drive a discrete power stage which drives the IGBT - V = 1230 V for ACPL-J313 IORM peak gate. The ANCW3130 has the highest insulation voltage of - V = 1414 V for ACNW3130 IORM peak V = 1414 V in the IEC/EN/DIN EN 60747-5-5. The IORM peak ACPL-J313 has an insulation voltage of V = 1230 V IORM peak Specifications and the V = 630 V is also available with the ACPL- IORM peak 2.5 A maximum peak output current. 3130 (Option 060). 2.0 A minimum peak output current. Functional Diagram 40 kV/s minimum Common Mode Rejection (CMR) at V = 1500 V CM N/C 1 8 V N/C 1 8 V CC CC 0.5 V maximum low level output voltage (V ) eliminates OL need for negative gate drive ANODE V V 2 7 ANODE 2 7 O O I = 5 mA maximum supply current CC CATHODE 3 6 V CATHODE 3 6 N/C O Under Voltage Lock-Out protection (UVLO) with hysteresis N/C 4 5 V N/C 4 5 V EE EE SHIELD SHIELD Wide operating V range: 15 to 30 Volts CC 500 ns maximum switching speeds ACPL-3130 and ACPL-J313 ACNW3130 Industrial temperature range: -40C to 100C Truth Table Applications V V V V CC EE CC EE IGBT/MOSFET gate drive POSITIVE GOING NEGATIVE GOING LED (i.e., TURN-ON) (i.e., TURN-OFF) VO AC/Brushless DC motor drives OFF 0 - 30 V 0 - 30 V LOW Industrial inverters ON 0 - 11 V 0 - 9.5 V LOW Switching Power Supplies (SPS) ON 11 - 13.5 V 9.5 - 12 V TRANSITION ON 13.5 - 30 V 12 - 30 V HIGH Note: A 0.1 F bypass capacitor must be connected between pins V and V . CC EE CAUTION: It is advised that normal static precautions be taken in handling and assembly of this component to prevent damage and/or degradation which may be induced by ESD.Ordering Information ACPL-3130 and ACPL-J313 are UL Recognized with 3750 Vrms for 1 minute per UL1577. ACNW3130 is UL Recognized with 5000Vrms for 1 minute per UL1577. Option Surface Gull Tape IEC/EN/DIN EN Part number RoHS Compliant Package Mount Wing & Reel 60747-5-5 Quantity -000E 50 per tube -300E X X 50 per tube -500E X X X 1000 per reel 300mil ACPL-3130 DIP-8 -060E X 50 per tube -360E X X X 50 per tube -560E X X X X 1000 per reel -000E X 50 per tube 300mil ACPL-J313 -300E X X X 50 per tube DIP-8 -500E X X X X 1000 per reel -000E X 42 per tube 400mil ACNW3130 -300E X X X 42 per tube DIP-8 -500E X X X X 750 per reel To order, choose a part number from the part number column and combine with the desired option from the option column to form an order entry. Example 1: ACPL-3130-560E to order product of 300mil DIP Gull Wing Surface Mount package in Tape and Reel packaging with IEC/EN/DIN EN 60747-5-5 Safety Approval in RoHS compliant. Example 2: ACPL-3130-000E to order product of 300mil DIP package in tube packaging and RoHS compliant. Option datasheets are available. Contact your Avago sales representative or authorized distributor for information. Remarks: The notation XXX is used for existing products, while (new) products launched since 15th July 2001 and RoHS compliant option will use -XXXE. 2