ACPL-K312-560E Broadcom

ACPL-H312 and ACPL-K312 2.5 Amp Output Current IGBT Gate Drive Optocoupler with Low I and UVLO in Stretched SO8 CC Data Sheet Description Features The ACPL-H312/K312 contains a GaAsP LED. The LED is 2.5 A maximum peak output current optically coupled to an integrated circuit with a power output 2.0 A minimum peak output current stage. These optocouplers are ideally suited for driving power 15 kV/s minimum Common Mode Rejection (CMR) at IGBTs and MOSFETs used in motor control inverter applications. V = 1500 V CM The high operating voltage range of the output stage provides 0.5 V maximum low level output voltage (VOL) the drive voltages required by gate controlled devices. The I = 3 mA maximum supply current CC voltage and current supplied by these optocouplers make Under Voltage Lock-Out protection (UVLO) with hysteresis them ideally suited for directly driving IGBTs with ratings up to 1200V/100A. For IGBTs with higher ratings, the Package Clearance and Creepage at 8mm (ACPL-K312) ACPL-H312/K312 series can be used to drive a discrete power Wide operating VCC range: 15 to 30 Volts stage which drives the IGBT gate. The ACPL-H312 has an 500 ns maximum switching speeds insulation voltage of V = 891 V (Option 060). The IORM peak Industrial temperature range: -40C to 100C ACPL-K312 has an issulation voltage of V = 1140 V IORM peak Safety Approval (Option 060). UL1577 recognized 3750 Vrms for 1 minute for ACPL-H312 Application Note 5000 Vrms for 1 minute for ACPL-K312 AN5336 Gate Drive Optocoupler Basic Design CSA Approved IEC/EN/DIN EN 60747-5-5 Approved V = 891 V for ACPL-H312 IORM peak V = 1140 V for ACPL-K312 IORM peak Applications IGBT/MOSFET gate drive Inverter for industrial motor Inverter for electrical home appliances Switching power supplies (SPS) CAUTION: It is advised that normal static precautions be taken in handling and assembly of this component to prevent damage and/or degradation which may be induced by ESD. The components featured in this data sheet are not to be used in military or aerospace applications or environments. Broadcom - 1 -ACPL-H312 and ACPL-K312 Data Sheet Functional Diagram V 1 8 ANODE CC V 2 7 O V 3 6 CATHODE EE V 4 5 EE SHIELD NOTE A 1-F bypass capacitor must be connected between pins V and V . CC EE Truth Table V V E POSITIVE GOING V V NEGATIVE GOING CC E CC EE V LED O (that is, TURN-ON) (that is, TURN-OFF) OFF 030V 030V LOW ON 011V 09.5V LOW ON 1113.5V 9.512V TRANSITION ON 13.530V 1230V HIGH Broadcom - 2 -