ACPL-M51L-000E Broadcom

ACPL-M51L 1MBd Low Supply Voltage Digital Optocoupler Data Sheet Lead (Pb) Free RoHS 6 fully compliant RoHS 6 fully compliant options available -xxxE denotes a lead-free product Description Features The ACPL-M51L (single-channel in SO-5 footprint), is low Wide supply voltage V : 2.25V to 24V CC power, low supply voltage 1MBd digital optocoupler, con- Low Drive Current : 3.0mA figurable as a 4pin device. Open-Collector Output This digital optocoupler use an insulating layer between TTL compatible (5-pin configuration) the light emitting diode and an integrated photon detec- Compact SO-5 package tor to provide electrical insulation between input and out- put. 15 kV/s High Common-Mode Rejection at V = CM 1500 V ACPL-M51L has an increased common mode transient im- munity of 15kV/s minimum at V = 1500V. Guaranteed performance within temperature range: CM -40C to +105C The current transfer ratio (CTR) is 140% typical for ACPL- Low Propagation Delay: 1s max at 5V M51L at I = 3.0mA. This digital optocoupler can be use in F (5pin configuration) any TTL/CMOS, TTL/LSTTL or analog applications. Worldwide Safety Approval: Functional Diagram - UL1577 recognized, 3750Vrms/1min - CSA Approval 6 V CC Anode 1 - IEC/EN/DIN EN 60747-5-5 Approval for Reinforced Insulation 5 V O Applications Cathode 3 Communications Interface 4 GND Digital Signal Isolation MCU Interface Feedback Elements in Switching Power Supplies 6 V O Digital isolation for A/D, D/A conversion Digital field Anode 1 Truth Table 5 LED Vo Cathode 3 ON LOW 4 GND OFF HIGH A 0.1F bypass capacitor must be connected between pins V and GND. CC 4-pin configuration : Pins 5 and 6 are externally shorted CAUTION: It is advised that normal static precautions be taken in handling and assembly of this component to prevent damage and/or degradation which may be induced by ESD. The components featured in this datasheet are not to be used in military or aerospace applications or environments.Ordering Information ACPL-M51L is UL Recognized with 3750 V for 1 minute per UL1577. rms Options Surface Tape IEC/EN/DIN EN Part Number RoHS Compliant Package Mount & Reel 60747-5-5 Quantity ACPL-M51L -000E SO-5 X 100 per tube -060E X X 100 per tube -500E X X 1500 per reel -560E X X X 1500 per reel To order, choose a part number from the part number column and combine with the desired option from the option column to form an order entry. Example 1: ACPL-M51L-560E to order product of Small Outline SO-5 package in Tape and Reel packaging with IEC/EN/DIN EN 60747-5-5 Safety Approval in RoHS compliant. Option datasheets are available. Contact your Avago sales representative or authorized distributor for information. Package Outline Drawings ACPL-M51L Small Outline SO-5 Package (JEDEC MO-155) 4.4 (0.17) DATE CODE M51L 1.3 7.0 0.2 4.4 0.1 (0.05) YWW (0.276 0.008) 2.5 (0.173 0.004) (0.10) XXX LOT ID 1.8 0.64 (0.072) (0.025) 0.4 0.05 8.27 (0.016 0.002) (0.325) 3.6 0.1* (0.142 0.004) 0.102 0.102 0.216 0.038 2.5 0.1 (0.004 0.004) (0.098 0.004) (0.0085 0.0015) 7 MAX. 0.71 1.27 BSC MIN (0.050) (0.028) Dimensions in Millimeters (Inches) MAX. LEAD COPLANARITY = 0.102 (0.004) * Maximum mold ash on each side is 0.15 mm (0.006) Note: Floating lead protrusion is 0.15 mm (6 mils) max. 2