ACPL-T350-560E

ACPL-T350 2.5 Amp Output Current IGBT Gate Driver Optocoupler with Low I CC Data Sheet Lead (Pb) Free RoHS 6 fully compliant RoHS 6 fully compliant options available -xxxE denotes a lead-free product Description Features The ACPL-T350 contains a GaAsP LED. The LED is optically 2.5A Absolute Maximum Peak Output Current coupled to an integrated circuit with a power output 15 kV/s minimum Common Mode Rejection (CMR) at stage. These optocouplers are ideally suited for driving V = 1500 V CM power IGBTs and MOSFETs used in motor control inverter 1.5 V maximum low level output voltage (V ) OL applications. The high operating voltage range of the output stage provides the drive voltages required by I = 4 mA maximum supply current CC gate controlled devices. The voltage and current supplied Under Voltage Lock-Out protection (UVLO) with by these optocouplers make them ideally suited for hysteresis directly driving IGBTs with ratings up to 1200 V/100 A. Wide operating V range: 15 to 30 Volts CC For IGBTs with higher ratings, the ACPL-T350 series can be used to drive a discrete power stage whichs drives the 500 ns maximum switching speeds IGBT gate. The ACPL-T350 has an insulation voltage of Industrial temperature range: -40C to 100C V = 630 Vpeak (Option 060). IORM Safety Approval - UL Recognized 3750 Vrms for 1 min. Functional Diagram - CSA Approval ACPL-T350 - IEC/EN/DIN EN 60747-5-5 Approved V = 630 V (Option 060) IORM peak N/C 1 8 V CC Applications ANODE 2 7 V O IGBT/MOSFET gate drive CATHODE 3 6 V O Inverter for Home Appliances Industrial Inverters N/C 4 5 V EE SHIELD Switching Power Supplies (SPS) Note: A 0.1 F bypass capacitor must be connected between pins V CC and V . EE UVLO Truth Table V V V V CC EE CC EE POSITIVE GOING NEGATIVE GOING LED (i.e., TURN-ON) (i.e., TURN-OFF) V O OFF 0 - 30 V 0 - 30 V LOW ON 0 - 11 V 0 - 9.5 V LOW ON 11 - 13.5 V 9.5 - 12 V TRANSITION ON 13.5 - 30 V 12 - 30 V HIGH CAUTION: It is advised that normal static precautions be taken in handling and assembly of this component to prevent damage and/or degradation which may be induced by ESD.Ordering Information ACPL-T350 is UL Recognized with 3750 Vrms for 1 minute per UL1577. Option Part IEC/EN/DIN EN number RoHS Compliant Package Surface Mount Gull Wing Tape& Reel 60747-5-5 Quantity ACPL-T350 -000E 300mil DIP-8 50 per tube -300E X X 50 per tube -500E/500ME X X X 1000 per reel -060E X 50 per tube -360E X X X 50 per tube -560E/560ME XXXX 1000 per reel To order, choose a part number from the part number column and combine with the desired option from the option column to form an order entry. Example 1: ACPL-T350-560E to order product of 300mil DIP Gull Wing Surface Mount package in Tape and Reel packaging with IEC/EN/DIN EN 60747-5-5 Safety Approval in RoHS compliant. Example 2: ACPL-T350-000E to order product of 300mil DIP package in tube packaging and RoHS compliant. Option datasheets are available. Contact your Avago sales representative or authorized distributor for information. Remarks: The notation XXX is used for existing products, while (new) products launched since 15th July 2001 and RoHS compliant option will use -XXXE. Regulatory Information The ACPL-T350 is approved by the following organizations: IEC/EN/DIN EN 60747-5-5 (ACPL-T350 Option 060 only) UL Approval under: Approval under UL 1577, component recognition DIN EN 60747-5-5 (VDE 0884-5):2011-11 program, File E55361. EN 60747-5-5:2011 CSA Approval under CSA Component Acceptance Notice 5, File CA 88324. Recommended Pb-Free IR Profi le Recommended refl ow condition as per JEDEC Standard, J-STD-020 (latest revision). Non-Halide Flux should be used. 2