APDS-9007-020 Broadcom

APDS-9007 Ambient Light Photo Sensor with Logarithmic Current Output Data Sheet Description Features The APDS-9007 is an analog current output Ambient Excellent responsivity - Light Photo Sensor, packaged in a miniature chipLED Close responsivity to the human eye lead-free surface mount package. Miniature ChipLED Leadfree surface-mount package This device provides a Logarithmic response over a wide Height 0.8 mm dynamic range of 3 lux to 70K lux and has a low sensitiv- Length 2.4 mm ity variation across various light sources. It is well suited Width 2.0 mm for applications that operates under high ambient bright- Low sensitivity variation across various light sources ness. Operating temperature : -40C to 85C Application Support Information Vcc supply 2 to 3.6V The Application Engineering Group is available to assist Lead-free package with RoHS compliance you with the application design associated with APDS- Photo current response to wide dynamic range of 3 9007 ambient light photo sensor module. You can lux to 70K lux contact them through your local sales representatives for additional details. Applications Detection of ambient light to control display backlighting Mobile devices Mobile phones, PDAs Computing devices Notebooks, Webpads Consumer devices TVs, Video Cameras, Digital Still Camera Automatic Residential and Commercial Lighting Management Electronic Signs and SignalsOrdering Information Part Number Packaging Type Package Quantity APDS-9007-0 0 Tape and Reel 6-pins Chipled package 500 Typical Application Circuit I/O Pins Configuration Table Pin 4: VCC Pin Symbol Description 1 Gnd Ground NC * No Connect Pin 3: OUT APDS- 3 Out Output 9007 Pin 6: SD 4 Vcc Supply Voltage RLoad 5 NC * No Connect Pin 1: GND 6 SD Shutdown (Active High) GND GND Figure 1. Typical application circuit for APDS-9007 (RLoad = 27 K Ohm) Absolute Maximum Ratings For implementations where case to ambient thermal resistance is 50 C /W Parameter Symbol Min. Max. Units Storage Temperature T -40 85 C S Supply Voltage V 0 3.6 V CC Recommended Operating Conditions Parameter Symbol Min. Max. Units Conditions Operating Temperature T -40 85 C A Supply Voltage V 3.6 V CC CAUTION: It is advised that normal static precautions be taken in handling and assembly of this component to prevent damage and/or degradation which may be induced by ESD