Data Sheet ASMT-QxBD-Axxxx Super 0.5W Power PLCC-4 Surface Mount LED Indicator Overview Features The Super 0.5W Power PLCC-4 SMT LEDs are an Industry Standard PLCC 4 platform (3.2 mm 2.8 mm 1.9 mm) extension of the Power PLCC-4 SMT LEDs. The package High-reliability package with enhanced silicone resin can be driven at high current due to its superior package encapsulation design. The product is able to dissipate the heat more High-intensity brightness with optimum flux efficiently compared to the Power PLCC-4 SMT LEDs. performance using AllnGaP chip technologies These LEDs also produce higher light output with better flux Available in Red and Amber colors performance compared to the Power PLCC-4 SMT LEDs. High optical efficiency The Super 0.5W Power PLCC-4 SMT LEDs are designed Available in 8 mm carrier tape and 7-inch reel for higher reliability, better performance, and operate under Low thermal resistance 60C/W a wide range of environmental conditions. The performance Super-wide viewing angle at 120 characteristics of these new mid-power LEDs make them Longer lifetime with minimum degradation due to uniquely suitable for use in harsh conditions such as in enhanced Silicone resin material automotive applications and in electronics signs and JEDEC MSL 2 signals. Applications To facilitate easy pick and place assembly, the LEDs are Exterior automotive: packed in EIA-compliant tape and reel. Every reel is shipped in single intensity and color bin (except for red), to provide Turn signals close uniformity. Side repeaters CHSML Super 0.5W Power PLCC-4 SMT LEDs are available in red Rear combination lamp and amber colors. Side markers Truck clearance lamp Electronic signs and signals: Channel lettering Contour lighting Indoor variable message sign Office automation, home appliances, industrial equipment: Front-panel backlighting Push-button backlighting Display backlighting Broadcom AV02-1841EN July 31, 2019ASMT-QxBD-Axxxx Data Sheet Super 0.5W Power PLCC-4 Surface Mount LED Indicator Package Drawing Figure 1: Package Drawing 2.8 0.2 0.6 0.3 1.15 0.2 1.9 0.2 2.2 0.2 CC A A 0.7 Anode Marking NOTE: All dimensions in millimeters. Lead polarity as shown in Figure 14. Terminal Finish: Ag plating Encapsulation material: Silicone resin Device Selection Guide a b Luminous Flux, (lm) V Test Current Dice Color Part Number Min. Flux (lm) Typ. Flux (lm) Max. Flux (lm) (mA) Technology Amber ASMT-QABD-AEF0E 11.5 16.5 19.5 150 AlInGaP Amber ASMT-QABD-AEFJE 11.5 19.5 150 AlInGaP Red Orange ASMT-QHBD-AEFBE 11.5 19.5 150 AlInGaP Red Orange ASMT-QHBD-AFH0E 15.0 17.5 33.0 150 AlInGaP Red Orange ASMT-QHBD-AFG0E 15.0 25.5 150 AlInGaP Red ASMT-QRBD-AEF0E 11.5 16.5 19.5 150 AlInGaP a. is the total luminous flux output as measured with an integrating sphere at mono pulse condition. V b. Flux tolerance is 12% Broadcom AV02-1841EN 2 3.6 0.2 3.2 0.2 2.4 0.79 0.3 0.97 0.56 (Typ.) 0.41 (Typ.)