HCPL-3020-300E

HCPL-3020/HCPL-0302 0.4 Amp Output Current IGBT Gate Drive Optocoupler Data Sheet Description Features The HCPL-3020 and HCPL-0302 consist of a GaAsP LED 0.4 A maximum peak output current optically coupled to an integrated circuit with a power 0.2 A minimum peak output current output stage. These optocouplers are ideally suited for High speed response: 0.7 s maximum propagation driving power IGBTs and MOSFETs used in motor control delay over temperature range inverter applications. The high operating voltage range of Ultra high CMR: minimum 10 kV/s at V = 1000 V CM the output stage provides the drive voltages required by gate-controlled devices. The voltage and current supplied Bootstrappable supply current: maximum 3 mA by this optocoupler makes it ideally suited for directly driv- Wide operating temperature range: 40C to 100C ing small or medium power IGBTs. For IGBTs with higher Wide V operating range: 10 V to 30 V over tempera- CC ratings, the HCPL-0314/3140 (0.6 A), HCPL-3150 (0.6 A) or ture range HCPL-3120 (2.5 A) gate drive opto-couplers can be used. Available in DIP 8 and SO-8 packages Safety approvals: UL approval, 3750 V for 1 minute RMS Functional Diagram CSA approval IEC/EN/DIN EN 60747-5-2 approval N/C 1 8 V CC V = 630 V (HCPL-3020), IORM PEAK V = 566 V (HCPL-0302) IORM PEAK N/C ANODE 2 7 Applications CATHODE 3 6 V O Isolated IGBT/power MOSFET gate drive AC and brushless DC motor drives N/C 4 5 V EE SHIELD Industrial inverters Air conditioner Washing machine Truth Table Induction heater for cooker LED V O Switching power supplies (SPS) OFF LOW ON HIGH Note: A 0.1 uF bypass capacitor must be connected between pins V and V . CC EE CAUTION: It is advised that normal static precautions be taken in handling and assembly of this component to pre- vent damage and /or degradation which may be induced by ESD.Ordering Information Specify part number followed by option number (if desired). Example: HCPL-3020-XXXX No option = Standard DIP package, 50 per tube 300 = Gull Wing Surface Mount Option, 50 per tube 500 = Tape and Reel Packaging Option 060 = IEC/EN/DIN EN 60747-5-2, V = 630 V IORM PEAK XXXE = Lead Free Option HCPL-0302-XXXX No option = Standard SO-8 package, 100 per tube 500 = Tape and Reel Packaging Option 060 = IEC/EN/DIN EN 60747-5-2, V = 566 V IORM PEAK XXXE = Lead Free Option Package Outline Drawings HCPL-3020 Standard DIP Package 7.62 0.25 9.65 0.25 (0.300 0.010) (0.380 0.010) 8 7 6 5 6.35 0.25 TYPE NUMBER OPTION CODE* (0.250 0.010) DATE CODE A XXXXZ YYWW 1 2 3 4 1.78 (0.070) MAX. 1.19 (0.047) MAX. + 0.076 0.254 5 TYP. - 0.051 + 0.003) (0.010 - 0.002) 3.56 0.13 4.70 (0.185) MAX. (0.140 0.005) 0.51 (0.020) MIN. DIMENSIONS IN MILLIMETERS AND (INCHES). 2.92 (0.115) MIN. * MARKING CODE LETTER FOR OPTION NUMBERS. = OPTION 060 OPTION NUMBERS 300 AND 500 NOT MARKED. 1.080 0.320 0.65 (0.025) MAX. (0.043 0.013) NOTE: 2.54 0.25 FLOATING LEAD PROTUSION IS 0.25 mm (10 mils) MAX. (0.100 0.010) 2