HCPL-315J-500E

Data Sheet HCPL-3150 (Single Channel), HCPL-315J (Dual Channel) 0.5 Amp Output Current IGBT Gate Drive Optocoupler Overview Features The Broadcom HCPL-315X consists of an LED optically 0.6A maximum peak output current coupled to an integrated circuit with a power output stage. 0.5A minimum peak output current This optocoupler is ideally suited for driving power IGBTs 15-kV/s minimum Common Mode Rejection (CMR) at and MOSFETs used in motor control inverter applications. V = 1500V CM The high operating voltage range of the output stage 1.0V maximum low level output voltage (V ) OL provides the drive voltages required by gate-controlled eliminates need for negative gate drive devices. The voltage and current supplied by this I = 5 mA maximum supply current CC optocoupler makes it ideally suited for directly driving IGBTs Under voltage lock-out protection (UVLO) with with ratings up to 1200V/50A. For IGBTs with higher ratings, hysteresis the HCPL-3150/315J can be used to drive a discrete power Wide operating V range: 15V to 30V CC stage which drives the IGBT gate. 0.5-s maximum propagation delay 0.35-s maximum delay between devices/channels Industrial temperature range: 40C to 100C Applications HCPL-315J: channel one to channel two output Isolated IGBT/MOSFET gate drive isolation = 1500 Vrms/1 min. AC and brushless DC motor drives Safety and regulatory approval: Industrial inverters UL recognized (UL1577), Switch mode power supplies (SMPSs) 3750 Vrms/1 min. (HCPL-3150) Uninterruptable power supplies (UPSs) 5000 Vrms/1 min. (HCPL-315J) IEC/EN/DIN EN 60747-5-5 approved V = 630 V (HCPL-3150 option 060 only) IORM peak V = 1414 V (HCPL-315J) CSA certified IORM peak CAUTION It is advised that normal static precautions be taken in handling and assembly of this component to prevent damage and/or degradation that may be induced by ESD. The components featured in this data sheet are not to be used in military or aerospace applications or environments. Broadcom AV02-0164EN October 20, 2017HCPL-3150 (Single Channel), HCPL-315J (Dual Channel) Data Sheet 0.5 Amp Output Current IGBT Gate Drive Optocoupler Functional Diagram N/C 1 16 V CC V ANODE 2 15 O N/C 1 8 V CC TRUTH TABLE CATHODE 3 14 V V V V V EE CC EE CC EE SHIELD LED POSITIVE-GOING NEGATIVE-GOING V O ANODE V 2 7 O (i.e. TURN-ON) (i.e. TURN-OFF) OFF 0 - 30 V 0 - 30 V LOW V ANODE 6 11 CATHODE 3 6 V CC O ON 0 - 11 V 0 - 9.5 V LOW ON 11 - 13.5 V 9.5 - 12 V TRANSITION CATHODE 7 10 V O N/C 4 5 V ON 13.5 - 30 V 12 - 30 V HIGH EE SHIELD N/C 8 9 V EE SHIELD HCPL-3150 HCPL-315J NOTE: A 0.1-F bypass capacitor must be connected between the V and V pins for each channel. CC EE Selection Guide: Inverter Gate Drive Optoisolators Widebody Package Type 8-Pin DIP (300 mil) Small Outline SO-16 (400 mil) Part Number HCPL-3150 HCPL-3120 HCPL-J312 HCPL-J314 HCNW- HCPL-315J HCPL-316J HCPL-314J 3120 Number of Channels 1111121 2 IEC/EN/DIN V V V V IORM IORM IORM IORM EN 60747-5-5 Approvals 630 Vpeak 1230 Vpeak 1414 Vpeak 1414 Vpeak Option 060 UL Approval 5000 Vrms/1 min. 5000 Vrms/1min. 5000 Vrms/ 5000 Vrms/1 min. 1 min. Output Peak Current 0.5A 2A 2A 0.4A 2A 0.5A 2A 0.4A CMR (Minimum) 15 kV/s 10 kV/s 15 kV/s 10 kV/s UVLO Yes No Yes No Fault Status No Yes No Broadcom AV02-0164EN 2