Data Sheet HLMP-Pxxx Series, HLMP-Qxxx Series, HLMP-6xxx Series, HLMP-70xx Series Subminiature LED Lamps Description Features Subminiature flat top package Flat Top Package Ideal for backlighting and light piping applications The Broadcom HLMP-Pxxx Series flat top lamps use an Subminiature dome package untinted, nondiffused, truncated lens to provide a wide Diffused dome for wide viewing angle radiation pattern that is necessary for use in backlighting Nondiffused dome for high brightness applications. The flat top lamps are also ideal for use as TTL and LSTTL compatible 5V resistor lamps emitters in light pipe applications. Available in six colors Ideal for space limited applications Dome Packages Axial leads Available with lead configurations for surface mount The Broadcom HLMP-6xxx Series dome lamps for use as and through hole PCB mounting indicators use a tinted, diffused lens to provide a wide viewing angle with a high on-off contrast ratio. High brightness lamps use an untinted, nondiffused lens to provide a high luminous intensity within a narrow radiation pattern. Resistor Lamps The Broadcom HLMP-6xxx Series 5 volt subminiature lamps with built-in current limiting resistors are for use in applications where space is at a premium. Lead Configurations All of these devices are made by encapsulating LED chips on axial lead frames to form molded epoxy subminiature lamp packages. A variety of package configuration options is available. These include special surface mount lead configurations, gull wing, yoke lead, or Z-bend. Right angle lead bends at 2.54 mm (0.100 inch) and 5.08mm (0.200 inch) center spacing are available for through hole mounting. For more information, refer to the Standard SMT and Through Hole Lead Bend Options for Subminiature LED Lamps data sheet. Broadcom AV02-3609EN July 13, 2020HLMP-Pxxx Series, HLMP-Qxxx Series, HLMP-6xxx Series, HLMP-70xx Series Data Sheet Subminiature LED Lamps Device Selection Guide Part Number: HLMP-xxxx Standard DH AS High Efficiency High Perf. Emerald Device Device Outline Orange Yellow Red AlGaAs Red Red Green Green Description Drawing P005 P105 P205 P405 P305 P505 P605 Untinted, Nondiffused, A Flat Top P102 P202 P402 P302 P502 Untinted, Diffused, A Flat Top 6000 Q100 6300 Q400 6400 6500 Q600 Tinted, Diffused B Q105 6305 Q405 6405 6505 Q605 Untinted, Nondiffused, B High Brightness Q150 7000 7019 7040 Tinted, Diffused, B Low Current Q155 Nondiffused, B Low Current 6600 6800 Tinted, Diffused, B Resistor, 5V, 10 mA 6620 6720 6820 Diffused, Resistor, 5V, B 4 mA Package Dimensions A. Flat Top Lamps B. Diffused and Nondiffused 0.50 (0.020) REF. 0.50 (0.020) REF. 1.40 (0.055) 1.65 (0.065) 11.68 (0.460) CATHODE 10.67 (0.420) 11.68 (0.460) CATHODE BOTH SIDES 10.67 (0.420) BOTH SIDES ANODE 0.46 (0.018) 0.56 (0.022) ANODE 0.46 (0.018) 1.65 (0.065) DIA. 0.56 (0.022) 1.91 (0.075) 1.65 (0.065) DIA. 0.25 (0.010) MAX. 1.91 (0.075) NOTE 2 0.25 (0.010) MAX. 0.20 (0.008) MAX. NOTE 2 0.20 (0.008) MAX. 2.21 (0.087) 2.21 (0.087) 0.76 (0.030) R. 0.18 (0.007) 1.96 (0.077) 1.96 (0.077) 0.89 (0.035) 0.23 (0.009) 0.94 (0.037) 1.14 (0.045) 2.03 (0.080) 1.24 (0.049) 1.40 (0.055) 1.78 (0.070) 0.63 (0.025) 0.38 (0.015) 2.44 (0.096) 2.92 (0.115) 1.88 (0.074) MAX. 0.63 (0.025) 0.79 (0.031) MAX. 0.38 (0.015) 0.79 (0.031) 0.18 (0.007) 0.53 (0.021) 0.23 (0.009) 2.08 (0.082) 2.34 (0.092) 2.08 (0.082) 2.34 (0.092) CATHODE CATHODE STRIPE STRIPE Notes: All dimensions are in millimeters (inches). Protruding support tab is connected to cathode lead. Lead polarity for ALGaAs lamps is opposite to the lead polarity of subminiature lamps using other technologies. Broadcom AV02-3609EN 2