Data Sheet HR5P-N1CA-00000 5-mm Round Infrared LED Lamp Description Features The Broadcom HR5P-N1CA-00000 is a 5-mm round Untinted, non-diffused infrared LED lamp. It is available in an industrial standard Low power consumption 5-mm through lamp, making it easy to use and assemble. It Easy assembly has a 850-nm peak wavelength and a viewing angle of Applications 30 degrees. This makes the HR5P-N1CA-00000 suitable for a variety of applications, such as smart meters, remote Illumination for surveillance camera controls, and more. This product is a cost-effective solution offering superior performance and a uniform illumination pattern. Figure 1: Package Drawing 0.38 NOTE: 1. All dimensions in millimeters (mm). 2. Tolerance is 0.25 mm unless otherwise specified. 3. Lead spacing is measured at where the leads emerge from the body. 4. Epoxy meniscus may extend up to maximum 1.00 mm down the leads. Broadcom HR5P-N1CA-00000-DS103 May 22, 2020HR5P-N1CA-00000 Data Sheet 5-mm Round Infrared LED Lamp Device Selection Guide (T = 25C, I = 100 mA) J F a, b, c d Radiant Intensity, I (mW/sr) Viewing Angle, 2 () e Part Number Die Type Min. Typ. Max. Typ. HR5P-N1CA-00000 AlGaAs 71.5 130.0 180.0 30 a. The radiant intensity is measured at the mechanical axis of the package with a single current pulse condition (t = 20 ms). p b. The optical axis is closely aligned with the mechanical axis of the package. c. Tolerance is 15%. d. is the off axis angle where the radiant intensity is half of the peak intensity. Absolute Maximum Ratings Parameters Rating Units a 100 mA DC Forward Current b, c 700 mA Peak Forward Current Power Dissipation 180 mW LED Junction Temperature 100 C Operating Temperature Range 40 to +85 C Storage Temperature Range 40 to +100 C a. Derate linearly as shown in Figure 4. b. Duty factor = 1%, t = 100 s. p c. Pin temperature, T = 25C. p Optical and Electrical Characteristics (T = 25C, I = 100 mA) J F Parameter Symbol Min. Typ. Max. Units Test Conditions a 59 mWI =100 mA, t = 20 ms Radiant Flux e F p Peak Wavelength 850 nm I =100 mA, t = 20 ms PEAK F p Temperature Coefficient of Brightness TC 0.23 %/C I = 100 mA Ie F Temperature Coefficient of TC 0.28 nm/C I = 100 mA p p F Spectral Line Half-Width 40 nm I = 100 mA, t = 20 ms 1/2 F p Junction Capacitance C 20 pF V = 0, f = 1 MHz J R b V 1.30 1.66 1.80 V I = 100 mA F F Forward Voltage Temperature Coefficient of V TC 0.85 mV/C I = 100 mA F VF F c V 5 V I = 10 A R R Reverse Voltage Rise Time t 15 ns I = 100 mA r F Fall Time t 15 ns I = 100 mA f F Cut-Off Frequency f 23 MHzI = 70 mA, I = 30 mA pp c DC AC Thermal Resistance R 200 C/W LED junction to pin J-P a. The radiant flux, is the total flux output as measured with an integrating sphere at a single current pulse condition (t = 20 ms). e p b. Forward voltage tolerance is 0.1 V. c. Indicates product final test condition. Long term reverse bias is not recommended. Broadcom HR5P-N1CA-00000-DS103 2