Slide LP Series Miniature Snap-in Slide Switches Features/Benefits Typical Applications 6 to 11 AMPS available Small appliances Easy assemblySnap-in mounting Outdoor appliances Contamination resistantextended actuator Portable tools Positive detent RoHS compliant Models Available Specifications Materials CONTACT RATING: Q contact material (LP0X, LP2X Models: 6 AMPS HOUSING: 6/6 nylon (UL94V-2), black. I 125 V AC or 28 V DC 3 AMPS 250 V AC (UL/CSA). ACTUATOR: Glass filled acetal, UV and petroleum resistant, (LP7X, LP8X Models): 11 AMPS 125/250 V AC (UL/CSA). black. See page I-27 for additional ratings. CONTACTS: Q contact material: Copper, silver plated. See page ELECTRICAL LIFE: 10,000 make-and-break cycles at full load. I-27 for additional contact materials. 9 INSULATION RESISTANCE: 10 min. TERMINALS: Q contact material: Copper, silver plated. See page DIELECTRIC STRENGTH: 1,000 Vrms min. sea level. I-27 for additional contact materials. CONTACT RESISTANCE: Below 10 m typ. initial CONTACT SPRING: Music wire or stainless steel. 2-4 V DC, 100 mA, for both silver and gold plated contacts. TERMINAL SEAL: Epoxy. OPERATING TEMPERATURE: -30C to +65C STORAGE TEMPERATURE: -30C to +85C NOTE: Any models supplied with Q, B or G contact material are RoHS compliant. NOTE: Specifications and materials listed above are for switches with standard options. For information on specific and custom switches, consult Customer Service Center. Build-A-Switch To order, simply select desired option from each category and place in the appropriate box. Available options are shown and described on pages I26 and I27. For additional options not shown in catalog, consult Customer Service Center. Switch Function LP22 DPDT, 6 AMP LP02 SPDT, 6 AMP Actuator LP81 DPST, 11 AMP C2 Black cap LP82 DPDT, 11 AMP C1 Whitecap C3 Red cap Detent 1 With detent Mounting Style T2 Snap-in panel with tabs (D, L, N markings only) Terminations 03 Solder lug with hole Housing Markings NONE No markings D ON-OFF Contact Material Q Silver B Gold Dimensions are shown: Inches (mm) Specifications and dimensions subject to change www.ckswitches.com I25LP Series Miniature Snap-in Slide Switches SWITCH FUNCTION NO. MODEL AMP SWITCH NO. MODEL AMP SWITCH POLES NO. RATING* FUNCTION SCHEMATIC POLES NO. RATING* FUNCTION SCHEMATIC SP LP02 6 SPDT LP22 6 DPDT LP81 11 DPST DP All models with all options when ordered with Q contact material. Contacts make on side actuator thrown. * For complete contact ratings, see CONTACT MATERIALS Section, page I-27. LP82 11 DPDT I .200 (5,08) Terminal Nos. For Reference Only Part number shown: LP22C21S203Q ACTUATOR C1 C2 C3 OPTION ACTUATOR CAP CODE2 COLOR C2 BLACK C1 WHITE NOTE: Actuator finish: gloss. Other colors available, C3 RED consult Customer Service Center. DETENT 1WITH DETENT MOUNTING STYLE T2SNAP-IN PANEL WITH TABS PANEL MOUNTING PANEL THICKNESS DIM A .030.045 .578 DIM. A (0,76) (1,14) (14,68) .046.059 .585 (1,17) (1,50) (14,86) .060.089 .598 (1,52) (2,26) (15,19) .090.120 .610 Mounting style T2 suitable for markings. (2,29) (3,05) (15,49) See HOUSING MARKINGS options. Dimensions are shown: Inch (mm) Specifications and dimensions subject to change www.ckswitches.com I26 Slide