Proximity Sensors Inductive Flat pack Polycarbonate Housing Types EI 5510/EI 5515, DC-Types Sensing distance 10 or 15 mm Flush and non-flush types Rated operational voltage: 10 to 40 VDC Output: DC 200 mA, NPN or PNP Normally open and normally closed function LED indication for output ON Inductive, Capacitive and Photoelectric flat pack series in PC housing, IP 67 Cable and plug versions Product Description Ordering Key EI 55 10 NPA P-1 Inductive proximity switch (W x H x D) 35 x 55 x 15 mm Type with sensing distance 10 made in polycarbonate. Housing mm flush mounted in metal Easy mounting with only two Range or 15 mm non-flush mount- M 3.5 screws. Ideal for use Output type ed. 4-wire with both make in conveying and material Housing material (NO) and break (NC) switch- handling applications. Connection type ing. Flat pack housing size Type Selection Housing Rated Ordering no. Ordering no. Ordering no. Ordering no. diameter operating NPN/cable NPN/plug PNP/cable PNP/plug W x H x D dist. (S) NO & NC NO & NC NO & NC NO & NC n 1) 35 x 55 x 15 mm 10 mm EI 5510 NPAP EI 5510 NPAP-1 EI 5510 PPAP EI 5510 PPAP-1 2) 35 x 55 x 15 mm 15 mm EI 5515 NPAP EI 5515 NPAP-1 EI 5515 PPAP EI 5515 PPAP-1 1) 2) For flush mounting in metal For non-flush mounting in metal Specifications Rated operational volt. (U ) 12 to 36 VDC Ambient temperature e (U) 10 to 40 VDC Operating -25 to +70C (-13 to +158F) B (ripple included) Storage -30 to +80C (-22 to +176F) Ripple 10% Degree of protection IP 67 (Nema 1, 3, 4 ,6, 13) Rated operational current (I ) Housing e Continuous 200 mA Dimensions 35 x 55 x 15 mm Material Polycarbonate, grey No-load supply current (I) 7 mA o 2 Cable 2 m, 4 x 0.3 mm Voltage drop (U) 2 VDC at max. load d grey PVC, oil proof Protection Rev erse polarity, Weight short-circuit Cable version 125 g Power ON delay 50 ms Plug version 40 g Frequency of operating EMC ratings Acc. to EN 50 082-2 cycles (f) EI 5510 500 Hz ENV 50 140 RF Electromagnetic EI 5515 250 Hz field AM, 80-1000 MHz, Level 3 10 V/m Indication for output ON LED, yellow ENV 50 204 RF Electromagnetic field PM, 80-900 MHz, Level 3 10 V/m Assured operating dist. (S ) 0 S 0.81 S a a n EN 61000-4-4 Fast transient Repeat accuracy (R) 5% Rep. freq. 5 kHz, Level 3 1 kV Hysteresis (H) Approvals UL, CSA (Differential travel) 1 to 15% of sensing distance CE-marking Yes Effective operating dist. (S ) 0.9 x S S 1.1 x S r n r n Usable operating dist. (S ) 0.9 x S S 1.1 x S u r u r Specifications are subject to change without notice (17.01.14) 1EI 5510/EI 5515 Dimensions LED EI 551PAP EI 551PAP-1 LED Wiring Diagrams 1 BN 1 BN 4 BK 2 WH 2 WH 4 BK 3 BU 3 BU NPN PNP Installation Hints To avoid interference from inductive voltage/ Relief of cable strain Protection of the sensing face Switch mounted on mobile carrier current peaks, separate the prox. switch pow- er cables from any other power cables, e.g. motor, contactor or solenoid cables Incorrect Correct The cable should not be pulled A proximity switch should not serve as Any repetitive flexing of the mechanical stop cable should be avoided Accessories Delivery Contents Plugs CONH1A.. series, please refer toAccessorie. Inductive switch: EI 551... Packaging: plastic bag 2 Specifications are subject to change without notice (17.01.14)