Timers Multifunction Type FMB01 Time range 0.05 s to 300 h Knob selection of time range Knob adjustable time setting Knob selection of operating mode (7 functions): Op - delay on operate Rb - symmetrical recycler OFF first R - symmetrical recycler ON first Id - double interval Dr - delay on release In - interval Io - interval on trigger open Manual start Gate and reset inputs Repeatability: 0.2% on full scale Output: 8 A DPDT relay 48 x 48 mm housing for front panel mounting 11 pin socket LED indication for relay status and power supply ON Product Description Ordering Key FMB 01 D W24 Multifunction timer with 7 48 x 48 mm for front panel Housing functions and selectable mounting and on 11-pin Function time range from 0.05 sec- socket. Type onds to 300 hours. Item number Output Power supply Type Selection Mounting Output Plug Supply: 12 to 240 VAC/DC Front or socket DPDT 11-pin FMB01DW24 Time Specifications Output Specifications Time ranges Output DPDT relay Knob selectable Rated insulation voltage 250 VAC Full scale 12 0.02 to 1.2s Contact ratings (AgSnO) 2 0.2 to 12s Resistive loads AC 1 8 A 250 VAC 2 to 120s DC 12 5 A 24 VDC 0.2 to 12min Small inductive loads AC 15 2.5 A 250 VAC 2 to 120min DC 13 2.5 A 24 VDC 0.2 to 12h 6 Mechanical life 30 x 10 operations 2 to 120h 5 Electrical life 10 operations Full scale 30 0.05 to 3s (at 8 A, 250 V, cos = 1) 0.5 to 30s Operating frequency 3600 operations/h 5 to 300s Dielectric strength 0.5 to 30min Dielectric voltage 2 kVAC (rms) 5 to 300min Rated impulse withstand volt. 4 kV (1.2/50 s) 0.5 to 30h 5 to 300h Setting accuracy 5% on full scale 50 ms Supply Specifications Repeatability 0.2% on full scale or 200 ms Power Supply Overvoltage cat II Time variation Rated operational voltage (IEC 60947-1) Within rated power supply 0.05%/V throuhgt terminals: 2, 10 12 to 240 VDC + 10% - 15% Within ambient temperature 0.2%/C 12 to 240 VAC + 10% -15%, 45 to 65 Hz Reset Power supply interruption >100 ms Power consuption Pulse width > 50 ms Rated operational power AC 3 VA DC 1.5 W Specifications are subject to change without notice (21.03.08) 1FMB01 General Specifications Indication for Weight Approx. 95 g Power supply On LED, green Approvals UL, CSA Output relays ON LED, yellow CE marking Yes (flashing when timing) EMC Electromagnetic Compatibillity Environment Immunity According to EN 61000-6-2 Degree of protection IP 50 (front panel) Emission According to EN 61000-6-3 Operating temperature -10 to +55 C, R.H. < 85% Timer specifications According to EN 61812-1 Storage temperature -10 to +55 C, R.H. < 85% Housing Dimesions 48 x 48 mm Material PA66 Mode of Operation Function Op Function R begins if the trigger contact as the trigger contact is Delay on operate Symmetrical recycler is closed before the end of closed. The relay releases at The time period begins as (ON first) the second time period the the end of this period or soon as the trigger contact The relay operates and the relay keeps ON and the first when the power supply is is closed. At the end of the time period begins as soon time period begins again. disconnected. The relay set delay time the relay as the input contact is operates again when the operates and doesnt closed. After the set delay Function Dr trigger contact is closed release until the power sup- period the relay releases for Delay on release again. If the trigger conctact ply is disconnected. the same time period. This The relay operates as soon is closed before the end of The trigger contact is invalid sequence continues with as the trigger contact is the delay time, the device while the timer is in opera- equal ON- and OFF- time closed. The time period resets and a new time peri- tion. periods until power supply is begins when the trigger con- od starts. interrupted. tact is opened. The relay Function Rb releases at the end of the Function Io Symmetrical recycler Function Id set delay time or when the Inteval on trigger open (OFF first) Double interval power supply is disconnect- The relay operates and the The time period begins as The relay operates and the ed. The relay operates again time period begins as soon soon as the input contact is time period begins as soon when the input conctact is as the trigger contact is closed. The relay is OFF as the trigger contact is closed again. If it is opened opened. The relay releases during the set delay period, closed. The relay releases at before the end of the delay at the end of this period or after this time it operates for the end of this period or time the relay keeps ON, a when the power supply is the same time period. This when the power supply is new time period begins as disconnected. The relay sequence continues with disconnected. When the soon as the contact is operates again when the equal OFF- and ON- time trigger contact is opened closed again. trigger contact is opened periods until power supply is the relay operates again for again. If the trigger conctact interrupted. the set delay period. If the Function In is opened before the end of trigger contact is opened Inteval the delay time, the device before the end of the first The relay operates and the resets and a new time peri- time period the second one time period begins as soon od starts. Function and Time Setting Lower left knob: Lower right knob: Upper right knob: Centre knob: Setting of function Time unit selector Time range selector Time setting on absolute Op - delay on operate 0.1s (0.1 seconds) 12 or 30 scale Rb - symmetrical recycler sec (seconds) (OFF first) 10sec (10 seconds) R - simmetrical recycler min (minutes) (On first) 10m (10 minutes) Id - double interval hrs (hours) Dr - delay on release 10h (10 hours) In - interval Io - interval on trigger open 2 Specifications are subject to change without notice (21.03.08)