Transmitter for Digital Signals Du line Type G 3420 5501 Fieldbus Installationbus 8-channel transmitter Optoisolated contact or NPN transistor inputs H4-housing For mounting on DIN-rail (EN 50022) LED-indications for supply, input activated and Dupline carrier AC or DC power supply Channel coding by GAP 1605 Product Description Ordering Key G 3420 5501 024 with open collector NPN Dupline transmitter for Type: Dupline transistoroutput, e.g. induc- exter-nal supply. Detects the H4-housing tive proximity switch EI .... states of 8 volt free contacts Transmitter N... and signals from devices No. of channels Input type Power supply Type Selection Input Specifications Supply Ordering no. Inputs 8 contacts or 8 channels NPN transistors Contact/NPN transistor AC version: Open loop voltage 7 VDC Short-circuit current 3 mA 24 VAC G 3420 5501 024 DC version: 115 VAC G 3420 5501 115 Open loop voltage 10 to 30 VDC 230 VAC G 3420 5501 230 Short-circuit current 8 mA Operating time for signal1 1 pulse train + 30 ms 10 to 30 VDC G 3420 5501 800 Operating time for signal0 1 pulse train + 30 ms Contact resistance 100 Cable length 25 m Dielectric voltage Inputs - Dupline 200 VAC (rms) Supply Specifications Power supply AC types Overvoltage cat. III (IEC 60664) Supply - Inputs 4 kVAC (rms) Rated operational voltage Power supply DC types Overvoltage cat. III (IEC 60664) through term. 21 & 22 230 230 VAC, 15% (IEC 60038) Rated operational 115 115 VAC, 15% (IEC 60038) voltage 800 10 to 30 VDC (ripple included) 024 24 VAC, 15% Ripple 3 V Frequency 45 to 65 Hz Reverse-polarity protection yes Voltage interruption 40 ms Rated operational current 100 mA Rated operational power typ. 2.5 VA Power dissipation 3.5 W Power dissipation 4 W Inrush current 1 A Rated impulse withstand Rated impulse withstand voltage 230 4 kV voltage 800 V 115 2.5 kV Dielectric voltage 024 800 V Supply - Dupline 200 VAC (rms) Dielectric voltage Supply - Inputs None Supply - Dupline 4 kVAC (rms) Specifications are subject to change without notice (30.04.03) 1 Dupline is a registered trademark. A product of the CARLO GAVAZZI GroupG 3420 5501 Du line Fieldbus Installationbus General Specifications Mode of Operation 8-channel transmitter with 8 Whenever the contact of the Power ON delay typ. 2 s inputs for contacts or NPN input is opened, the trans- Indication for transistors. An external pow- mitter stops transmitting on Supply ON LED, green er supply is not required. the respective channel. Input activated LED, red Each input may be coded in- Dupline carrier LED, yellow dividually by means of the Notes: Environment code programmer GAP -Terminals 4 and 24 are in- Degree of protection IP 20 1605. For details, please ternally connected. Pollution degree 3 (IEC 60664) refer to the respective data -Terminals 4 and 24 are Operating temperature -20 to +50C (-4 to +122F) sheet. common (minus). Storage temperature -50 to +85C (-58 to +185F) When a contact is used to Humidity (non-condensing) 20 to 80% short-circuit terminals 24 and Input connections 25 (input 1), the transmitter Mechanical resistance Input 1: terminals 24 & 25 transmits on the channel Shock 15 G (11 ms) Input 2: terminals 24 & 26 coded for input 1. Vibration 2 G (6 to 55 Hz) Input 3: terminals 24 & 27 When an NPN open collector Input 4: terminals 24 & 28 Dimensions transmitter between termi- Input 5: terminals 4 & 5 Material nals 24 and 28 (input 4) pulls Input 6: terminals 4 & 6 (see Technical Information) H4-Housing the input low (< +1 V), the Input 7: terminals 4 & 7 Weight 250 g transmitter transmits on the Input 8: terminals 4 & 8 channel coded for input 4. Operation Diagram Power supply Input 1 (term. 25) Transmission on chan. for input 1 Input 8 (term. 8) Transmission on channel for input 8 Wiring Diagrams 8 channels G 3420 5501 ... 8 channels G 3420 5501 ... Contact input NPN transistor input ~ ~ ~ ~ (+)(-) (+)(-) Power Power supply supply S: signal wire S: signal wire 2 Specifications are subject to change without notice (28.09.99) Dupline is a registered trademark. A product of the CARLO GAVAZZI Group