Photoelectrics Diffuse-reflective Type PD30CND10....SA Miniature sensor range Range: 1 m Sensitivity adjustment by Potentiometer Modulated, red light 625 nm Supply voltage: 10 to 30 VDC Output: 100 mA, NPN or PNP preset Make and break switching function LED indication for output, stability and power ON Protection: reverse polarity, short circuit and transients Cable and plug versions Excellent EMC performance Product Description Ordering Key PD30CND10NAM5SA The PD30CND10 sensor The Potentiometer function Type family comes in a compact for adjustment of the sen- Housing style 10 x 30 x 20 mm reinforced sitivity makes the sensors Housing size PMMA/ABS housing. highly flexible. The output Housing material The sensors are useful in type is preset (NPN or PNP), Housing length applications where high-ac- and the output switching Detection principle curacy detection as well as function is NO and NC out- Sensing distance small size is required. put. Output type Compact housing and high Output configuration power LED for excellent Connection type performance-size ratio. Sensitivity adjustment Type Selection Housing Range Connection Ordering no. Ordering no. W x H x D S NPN PNP n Make and break switching Make and break switching 10 x 30 x 20 mm 1000 mm Cable PD 30 CND 10 NASA PD 30 CND 10 PASA 10 x 30 x 20 mm 1000 mm Plug PD 30 CND 10 NAM5SA PD 30 CND 10 PAM5SA Specifications EN 60947-5-2 Rated operating distance (S ) Up to 1 m, OFF-state current (I ) 100 A n r reference target Kodak test Voltage drop (U ) 2 VDC I max d e card R27, white, 90% Protection Short-circuit, reverse polarity reflective, 200 x 200 mm and transients Blind zone 20 mm maximum Light source InGaAlP, LED, 625 nm distance Light type Red, modulated Sensitivity Emitter angle 2 half sensing Electrical adjustment 210 distance Mechanical adjustment 240 Light spot Temperature drift 0.2%/C 1.5 times the sensing distance 110 mm Hysteresis (H) 5% to 20% Ambient light 10,000 lux Rated operational volt. (U ) 10 to 30 VDC B (ripple included) Operating frequency (f) 1000 Hz Ripple (U ) 10% rpp Response time OFF-ON (t ) 0.5 ms Output current ON ON-OFF (t ) 0.5 ms Continuous (Ie) 100 mA OFF Short-time (I) 100 mA Power ON delay (t ) 30 ms v (max. load capacity 100 nF) Output function No load supply current (Io) 25 mA UB max Open collector NPN or PNP by sensor type Minimum operational current (Im) 0.5 mA Output switching function N.O. and N.C. Specifications are subject to change without notice (14.06.2016) 1 PD30CND10....SA Specifications (cont.) Indication Rated insulation voltage 500 VAC (rms) Output ON LED, yellow Housing material Signal stability ON and Body ABS Light Grey Power ON LED, green. See curve for Frontglas PMMA Red condition of stability Trimmer shaft POM Dark Grey Environment Connection Installation category III (IEC 60664/60664A Cable PVC, black, 2 m 60947-1) 2 4 x 0.14 mm , = 3.3 mm Pollution degree 3 (IEC 60664/60664A Plug M8, 4-pin (CON. 54-series) 60947-1) Weight Degree of protection IP 67 (IEC 60529 60947-1) Cable version 50 g Ambient temperature Plug version 20 g Operating -25 to +60C (-13 to +140F) CE-marking Yes Storage -40 to +70C (-40 to +158F) Approvals cULus (UL508 + CSA) Vibration 10 to 150 Hz, 1.0 mm/15 G (IEC 60068-2-6) Shock 30 g / 11ms, 3 pos, 3 neg per axis (IEC 60068-2-6, 60068-2-32) Operation Diagram Tv = Power ON delay ON Power supply OFF Present Object Not Present Tv ON Break Output (N.C.) OFF Tv ON Make Output (N.O.) OFF Signal Stability Indication Wiring Diagrams 1BN NPN Excess Gain 2WH Operation level x 1.10 1.10 4BK Operation level 1.0 Operation level x 0.90 0.90 3BU 1BN Time PNP Green LED ON Yellow LED ON 4BK 2WH 3BU 2 Specifications are subject to change without notice (14.06.2016)