RSGD6085GGVX310C Carlo Gavazzi

RSGD Three phase AC motor soft starter Benefits Easy to use. The RSGD is equipped with a self-learning algorithm that automatically adjusts the start parameters to optimise the motor starts and stops. Fast installation and set-up. Only 3 settings are required (FLC, ramp-up and ramp-down). Compact dimensions. 12 - 45Arms in 45mm wide housing, 55 - 100Arms in 75mm wide housing. Integrated protection. Diagnostic functions provide additional protection. RSGD is also equipped with an overload protection (Class 10)*. Torque control during ramp-down. Smoother deceleration of the load. Complete monitoring. The RSGD is equipped with a Modbus/RTU communication port by 2-wire RS485 connection**. Guided model selection. Easy to use selection tool to select the appropriate soft starter model depending on the application type. Description RSGD is an extremely compact and easy to use 3-phase soft starter for AC induction motors rated up to 100Arms. The starting parameters can be easily set-up through 3 knobs. The integrated motor overload protection (Class 10) and Modbus communication** result in a higher installation flexibility. Applications RSGD soft starters are the ideal solution for 3-phase fixed speed AC induction motor applications where there is the need to reduce the starting current and/or minimise stresses on the motor during start and stop. The RSGD offers a number of integrated diagnostic functions that can replace additional components inside the electrical panel. Typical applications include: compressors, pumps and fans. Main functions Soft starting and soft stopping of AC motors. Integrated electronic overload protection (Class 10)*. Serial communication (Modbus) over RS485**. * RSGD VD210, VX210, VX310C, VX311C models only ** RSGD 75mm models only 23/08/2018 RSGD 45 75mm DS ENG Carlo Gavazzi LTD 1RSGD References Order code RSG D V Enter the code entering the corresponding option instead of Code Option Description Notes R - S - Soft starter G - General purpose D - Dual phase control 40 220 400 VAC +10% -15% operational voltage (Ue) 60 220 600 VAC +10% -15% operational voltage (Ue) 12 12 Arms 16 16 Arms 25 25 Arms 32 32 Arms Rated operational current 45 45 Arms 40C 55 55 Arms 70 70 Arms 85 85 Arms 100 100 Arms 110 - 400 VAC +10% -15% control voltage (Uc) E0 Supply voltage: internally supplied RSGD40 only 24 VAC/DC +10% -10% control voltage (Uc) F0 Supply voltage: internally supplied 24 VAC/DC +10% -10% control/supply voltage RSGD60 models from FF Supply voltage: externally supplied 55Arms to 100Arms only 100 - 240 VAC +10% -15% control/supply voltage GG RSGD60 only Supply voltage: externally supplied V - D No heatsink RSGD 45mm only X With heatsink 2 2 relay outputs RSGD 45mm only 3 3 relay outputs RSGD 75mm only 1 With integrated motor overload protection (Class 10) 0 Without motor overload protection RSGD 45mm only 1 With fan RSGD 100 only 0 No fan - Without communication RSGD 45mm only C With Modbus communication RSGD 75mm only 23/08/2018 RSGD 45 75mm DS ENG Carlo Gavazzi LTD 2