A Business Partner of Renesas Electronics Corporation. Data Sheet PG2163T5N R09DS0019EJ0300 GaAs Integrated Circuit Rev.3.00 May 19, 2011 Broadband SPDT Switch for Dual-Band Wireless LAN DESCRIPTION The PG2163T5N is GaAs MMIC SPDT (Single Pole Double Throw) switch which was developed for 2.4 GHz and 6 GHz dual-band wireless LAN. This device can operate at frequencies from 0.5 to 2.5 GHz, 4.9 to 6.0 GHz and 8.0 GHz, with low insertion loss and high isolation. This device is housed in a 6-pin plastic TSON (Thin Small Out-line Non-leaded) package. And this package is able to high-density surface mounting. <R> FEATURES Operating frequency : f = 0.5 to 2.5 GHz, 4.9 to 6.0 GHz and 8.0 GHz Switch control voltage : Vcont (H) = 2.8 to 5.0 V (3.0 V TYP.) : Vcont (L) = 0.3 to 0.3 V (0 V TYP.) Low insertion loss : Lins1 = 0.40 dB TYP. f = 2.4 to 2.5 GHz : Lins2 = 0.50 dB TYP. f = 4.9 to 6.0 GHz : Lins3 = 0.90 dB TYP. f = 8.0 GHz : Lins4 = 0.50 dB TYP. f = 0.5 to 2.5 GHz High isolation : ISL1 = 38 dB TYP. f = 2.4 to 2.5 GHz : ISL2 = 30 dB TYP. f = 4.9 to 6.0 GHz : ISL3 = 23 dB TYP. f = 8.0 GHz : ISL4 = 43 dB TYP. f = 0.5 to 1.0 GHz : ISL5 = 38 dB TYP. f = 1.0 to 2.5 GHz Handling power : Pin (1 dB) = +31.0 dBm TYP. f = 2.5 GHz, Vcont (H) = 3.0 V, Vcont (L) = 0 V : Pin (1 dB) = +29.0 dBm TYP. f = 6.0 GHz, Vcont (H) = 3.0 V, Vcont (L) = 0 V High-density surface mounting : 6-pin plastic TSON package (1.5 1.5 0.37 mm) <R> APPLICATIONS Dual-band wireless LAN (IEEE802.11a/b/g/n), etc. ORDERING INFORMATION Part Number Order Number Package Marking Supplying Form PG2163T5N-E2 PG2163T5N-E2-A 6-pin plastic TSON G4X Embossed tape 8 mm wide (Pb-Free) Pin 1, 6 face the perforation side of the tape Qty 3 kpcs/reel Remark To order evaluation samples, please contact your nearby sales office. Part number for sample order: PG2163T5N-A CAUTION Although this device is designed to be as robust as possible, ESD (Electrostatic Discharge) can damage this device. This device must be protected at all times from ESD. Static charges may easily produce potentials of several kilovolts on the human body or equipment, which can discharge without detection. Industry-standard ESD precautions must be employed at all times. The mark <R> shows major revised points. The revised points can be easily searched by copying an<R in the PDF file and specifying it in theFind what field. R09DS0019EJ0300 Rev.3.00 Page 1 of 8 May 19, 2011 DISCONTINUED Drop-In Replacement: CG2163X3G4X A Business Partner of Renesas Electronics Corporation. PG2163T5N PIN CONNECTIONS AND INTERNAL BLOCK DIAGRAM (Bottom View) Pin No. Pin Name (Top View) (Top View) 1 GND 1 6 1 6 6 1 2 Vcont2 3 OUT2 (RX) 2 5 2 5 5 2 4 OUT1 (TX) 5 Vcont1 3 4 3 4 4 3 6 IN (ANT) Remark Exposed pad : GND TRUTH TABLE Vcont1 Vcont2 IN (ANT)OUT1 (TX) IN (ANT)OUT2 (RX) High Low OFF ON Low High ON OFF ABSOLUTE MAXIMUM RATINGS (TA = +25C, unless otherwise specified) Parameter Symbol Ratings Unit Switch Control Voltage Vcont 6.0 to +6.0 V Input Power Pin +32 dBm Operating Ambient Temperature TA 45 to +85 C Storage Temperature Tstg 55 to +135 C <R> RECOMMENDED OPERATING RANGE (TA = +25C, unless otherwise specified) Parameter Symbol MIN. TYP. MAX. Unit Switch Control Voltage (H) Vcont (H) 2.8 3.0 5.0 V Switch Control Voltage (L) Vcont (L) 0.3 0 0.3 V Note 1 Operating Frequency 1 f1 2.4 2.5 GHz Note 1 Operating Frequency 2 f2 4.9 6.0 GHz Note 2 Operating Frequency 3 f3 8.0 GHz Note 3 Operating Frequency 4 f4 0.5 1.0 GHz Note 3 Operating Frequency 5 f5 1.0 2.4 GHz Notes 1. DC blocking capacitors = 4 pF 2. DC blocking capacitors = 2 pF 3. DC blocking capacitors = 100 pF R09DS0019EJ0300 Rev.3.00 Page 2 of 8 May 19, 2011 DISCONTINUED Drop-In Replacement: CG2163X3