SCI0501200 Celduc

S/CON/SCI0501200/D/19/12/14 Page 1/5 UK IGBT BASED DC SOLID-STATE RELAY SCI0501200 Latest high voltage IGBT technology generation. New innovative isolated driver ensuring fast power transistor turn on and off therefore low power transient. Ultra low output leakage current Control voltage range 4.5-32VDC Low control current consumption Max transient peak 1200V Triggered control input to avoid linear control risks voltage (Depends on Advised max. DC protection clamping Low conducted and radiated disturbances Mains peak voltage voltage) Max. Load Current 50ADC (with heatsink) DC Mains Control input In & case / Out Dimensions Load current range Connections Weight voltage range voltage range Insulation (WxHxD) 44.5 x 58.2 x 27 (Depends on protection M3 round tabs 0 to 50A 4.5-32VDC 4kV 100g clamping voltage) (with heatsink) M5 round tabs (mm) HIGH SIDE WIRING DIAGRAM LOW SIDE WIRING DIAGRAM Fig. 1 Fig. 2 (Load connected to -) (Load connected to +) Please consult Please consult us us to select the to select the right right protective protective components C1, components D1 & D2. C1, D1 & D2. The red paths The red paths (C1/D1/D2) must (C1/D1/D2) be as short as must be as possible short as possible Fig. 3 INTERNAL DIAGRAM Proud to serve you celduc Data given at Tambient=25C and subject to modification without previous notice r e l a i s celduc S/CON/SCI0501200/D/19/12/14 r e l a i s Page 2/5 UK CONTROL INPUT CHARACTERISTICS CONTROL CURRENT CHARACTERISTIC LABEL VALUE INFO. Fig. 4 vs. CONTROL VOLTAGE Nom. Control voltage Ucnom 12-24VDC Ic (mADC) 45 Nom. Control current Icnom 35mADC 40 typical=4.3V Control voltage range Uc 4.5 32VDC 35 Control current 30 25C See curve Ic 25 42mADC consumption 25 20 Typical= 3.5V Releasing control voltage Ucoffmax 1VDC 15 10 Max. reverse control 5 -Icmax <100A -Ucmax 32VDC voltage 0 0 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 Current Uc (VDC) See curve Input impedance Rin limitation TIME CHARACTERISTICS CHARACTERISTIC LABEL VALUE Turn on time ton 10s Turn on delay tdon 600s Turn off time toff 50s Turn off delay tdoff 100s Max. On-Off frequency F(on-off) 200Hz POWER OUTPUT CHARACTERISTICS CHARACTERISTIC LABEL VALUE INFO. Min = VCEsat Depends on protection Mains voltage range Ut Ue clamping voltage (D1) Max (Advised) = 650VDC Non-repetitive peak voltage Utp 1200V Not integrated Please consult us to select A voltage clamping mean must be connected across the the right protective Overvoltage protection D1 components terminals 1 & 2 (see fig 1 & 2) Off-state max reverse voltage drop Ie=50A -Ut 1.4V (internal diode) Resistive Motor Maximum nominal currents Ie max See fig. 9 50A Please contact us Tc=100C Tj=175C Max. non-repetitive non-switched Iepeak 320A Utp (See fig. 8) peak current Tj=25C Min. load current Iemin 0mA Utp Tjmax Max. leakage current Ielk max 1mA Voltage drop : Resistance rt Tj=125C 9m Tj=125C Voltage drop : Voltage vt 0.8V Max. on-state voltage VCEsat 1.5V Tj=25C 1.7V Tj=125C Iemax (Vcesat = vt + rt . Ie) Typ. output capacitance Cout 300pF Utp Junction/case thermal resistance Rthjc 0.365K/W Built-in heatsink thermal resistance Rthra 10K/W Tra=75C vertically mounted Heatsink thermal time constant Tthra 10 minutes Tra=60C Control inputs / power outputs / case Uimp 4kV insulation voltage Isolation resistance / capacitance Rio / Cio 1G<8pF Maximum junction temperature Tjmax Steady state = 125C Transient = 175C Storage ambient temperature Tstg -40->+100C Operating ambient temperature Tamb -40->+90C See fig. 9 Max. case temperature Tc 100C POWER CIRCUIT TIME CHARACT. INPUT CIRCUIT