Size code
MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS
Long life, 125
GXL
GXLSeries
Long-Life version of GXE series
Longer life
For automobile modules and other high temperature applications
GXE P206
Endurance with ripple current : 5,000 hours at 125
Solvent resistant type (see PRECAUTIONS AND GUIDELINES)
RoHS Compliant
SPECIFICATIONS
Items Characteristics
Category
-40 to +125
Temperature Range
Rated Voltage Range 10 to 50Vdc
Capacitance Tolerance 20% (M) (at 20, 120Hz)
Leakage Current I=0.03CV or 4A, whichever is greater.
Where, I : Max. leakage current (A), C : Nominal capacitance (F), V : Rated voltage (V) (at 20, 1 minute)
Dissipation Factor
Rated voltage (Vdc) 10V 16V 25V 35V 50V
(tan )
tan (Max.) 0.20 0.16 0.14 0.12 0.10 (at 20 , 120Hz)
Low Temperature Rated voltage (Vdc) 10V 16V 25V 35V 50V
Characteristics
Z(-25 )/Z(+20 ) 3 2 2 2 2
(Max. Impedance Ratio)
Z(-40)/Z(+20) 6 4 4 4 4 (at 120Hz)
Endurance The following specications shall be satised when the capacitors are restored to 20 after subjected to DC voltage with the rated
ripple current is applied (the peak voltage shall not exceed the rated voltage) for 5,000 hours at 125 .
Capacitance change 30% of the initial value
D.F. (tan ) 300% of the initial specied value
Leakage current The initial specied value
Shelf Life The following specications shall be satised when the capacitors are restored to 20 after exposing them for 1,000 hours at 125 without
voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4.
Capacitance change 30% of the initial value
D.F. (tan) 300% of the initial specied value
Leakage current The initial specied value
DIMENSIONS [mm]
Terminal Code : E
Sleeve (PET : Orange)
D 10
d 0.6
F 5.0
D' D+0.5max.
Vent L' 15min. 4min.
(10)
L'
L+1.5max.
Gas escape end seal
PART NUMBERING SYSTEM
1 23 4 56 7 8 9 10 11 12 13 15 16 17
14 18
E GXL AAA E AA AAA M AAA S
Supplement code
Capacitance tolerance code
Capacitance code (ex. 100 F:101, 1,000F:102)
Lead formingtaping code
Terminal code
Voltage code (ex. 10V:100, 50V:500)
Series code
Category
Please refer toProduct code guide (radial lead type
Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications.
208 CAT. No. E1001O
D'
d
F0.5MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS
Long life, 125
GXLSeries
STANDARD RATINGS
WV Cap Case size Impedance Rated ripple current
Part No.
(Vdc) (F) D L(mm) ( max./20 , 100kHz) (mArms/125 , 100kHz)
330 1012.5 0.17 800 EGXL100E331MJC5S
10 470 1012.5 0.17 800 EGXL100E471MJC5S
1,000 1020 0.094 1,300 EGXL100E102MJ20S
220 1012.5 0.17 800 EGXL160E221MJC5S
16 330 1012.5 0.17 800 EGXL160E331MJC5S
470 1016 0.12 1,050 EGXL160E471MJ16S
220 1012.5 0.17 800 EGXL250E221MJC5S
25 330 1016 0.12 1,050 EGXL250E331MJ16S
470 1020 0.094 1,300 EGXL250E471MJ20S
100 1012.5 0.17 800 EGXL350E101MJC5S
35 220 10 16 0.12 1,050 EGXL350E 221MJ16S
330 10 20 0.094 1,300 EGXL350E 331MJ20S
100 10 12.5 0.30 590 EGXL500E 101MJC5S
50
220 1020 0.19 970 EGXL500E221MJ20S
: Enter the appropriate lead forming or taping code.
RATED RIPPLE CURRENT MULTIPLIERS
Frequency Multipliers
Frequency(Hz)
Capacitance(F) 120 1k 10k 100k
100 0.40 0.75 0.90 1.00
220 to 470 0.50 0.85 0.94 1.00
1,000 0.60 0.87 0.95 1.00
The endurance of capacitors is reduced with internal heating produced by ripple current at the rate of halving the lifetime with every 5 rise.
When long life performance is required in actual use, the rms ripple current has to be reduced.
Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications.
209 CAT. No. E1001O