MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS For airbag module, 105 LBKSeries Downsizing of LBG series. For airbag application and power supply application LBK High capacitance, low ESR and good low temperature behavior Endurance with ripple current : 5,000 hours at 105 Downsized Solvent resistant type (see PRECAUTIONS AND GUIDELINES) RoHS2 Compliant LBG AEC-Q200 compliant : Please contact Chemi-Con for more details, test data, information. SPECIFICATIONS Items Characteristics Category -55 to +105 Temperature Range Rated Voltage Range 25 & 35V dc Capacitance Range 2,500 to 14,000F (at 20 , 120Hz) Capacitance Tolerance 0 to +30% (A) (at 20, 120Hz) Leakage Current I=0.01CV Where, I : Max. leakage current (A), C : Nominal capacitance (F), V : Rated voltage (V) (at 20 after 2 minutes) Dissipation Factor Rated voltage (Vdc) 25V 35V (tan ) tan (Max.) 0.20 0.16 When nominal capacitance exceeds 1,000F, add 0.02 to the value above for each 1,000F increase. (at 20 , 120Hz) Low Temperature Rated voltage (Vdc) 25V 35V Characteristics Z(-55)/Z(+20) 3 3 (Max. Impedance Ratio) (at 120Hz) Endurance The following specications shall be satised when the capacitors are restored to 20 after subjected to DC voltage with the rated ripple current is applied (the peak voltage shall not exceed the rated voltage) for 5,000 hours at 105 . Capacitance change 20% of the initial value D.F. (tan ) 200% of the initial specied value Leakage current The initial specied value Shelf Life The following specications shall be satised when the capacitors are restored to 20 after exposing them for 1,000 hours at 105 without voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4. Capacitance change 20% of the initial value D.F. (tan) 200% of the initial specied value Leakage current The initial specied value DIMENSIONS mm Terminal Code : E Sleeve (PET : Dark blue) D 16 18 d 0.8 0.8 F 7.5 7.5 D D+0.5max. L L+1.5max. Vent L 15min. 4min. Gas escape end seal PART NUMBERING SYSTEM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 E LBK AAA E AA AAA A AAA S Supplement code Size code Capacitance tolerance code Capacitance code (ex. 3,500F:352, 14,000F:143) Lead formingtaping code Terminal code Voltage code (ex. 25V:250, 35V:350) Series code Category Please refer toProduct code guide (radial lead type Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001S D d F0.5MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS For airbag module, 105 LBKSeries STANDARD RATINGS ESR ( max./100kHz) WV Cap Case size Rated ripple current tan Part No. (Vdc) ( F) D L (mm) (mArms/105 , 100kHz) 20 -40 4,200 16 20 0.26 0.033 0.095 2,250 ELBK250E422AL20S 5,300 18 20 0.28 0.029 0.082 2,500 ELBK250E532AM20S 5,900 16 25 0.28 0.024 0.073 2,600 ELBK250E592AL25S 7,500 18 25 0.32 0.022 0.063 2,800 ELBK250E752AM25S 8,000 16 31.5 0.34 0.021 0.052 3,200 ELBK250E802ALN3S 25 9,500 16 35.5 0.36 0.019 0.046 3,500 ELBK250E952ALP1S 10,000 18 31.5 0.38 0.019 0.045 3,500 ELBK250E103AMN3S 11,000 16 40 0.40 0.017 0.040 3,800 ELBK250E113AL40S 11,000 18 35.5 0.40 0.017 0.040 3,700 ELBK250E113AMP1S 14,000 18 40 0.46 0.015 0.035 4,000 ELBK250E143AM40S 2,500 16 20 0.18 0.033 0.095 2,250 ELBK350E 252AL20S 3,100 18 20 0.20 0.029 0.082 2,500 ELBK350E 312AM20S 3,500 16 25 0.20 0.024 0.073 2,600 ELBK350E 352AL25S 4,500 18 25 0.22 0.022 0.063 2,800 ELBK350E452AM25S 4,700 16 31.5 0.22 0.021 0.052 3,200 ELBK350E472ALN3S 35 5,600 16 35.5 0.24 0.019 0.046 3,500 ELBK350E562ALP1S 6,000 18 31.5 0.26 0.019 0.045 3,500 ELBK350E602AMN3S 6,600 16 40 0.26 0.017 0.040 3,800 ELBK350E662AL40S 7,100 18 35.5 0.28 0.017 0.040 3,700 ELBK350E712AMP1S 8,400 18 40 0.30 0.015 0.035 4,000 ELBK350E842AM40S : Enter the appropriate lead forming or taping code. RATED RIPPLE CURRENT MULTIPLIERS Frequency Multipliers Frequency(Hz) 120 1k 10k 100k Capacitance(F) 2,500 to 3,500 0.75 0.90 0.95 1.00 4,200 to 14,000 0.85 0.95 0.98 1.00 The endurance of capacitors is reduced with internal heating produced by ripple current at the rate of halving the lifetime with every 5 rise. When long life performance is required in actual use, the rms ripple current has to be reduced. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001S