EMZR250ARA221MF80G Chemi-Con

SURFACE MOUNT ALUMINUM ELECTROLYTIC CAPACITORS Low ESR, 105 Upgrade TM AIchip -MZRSeries MZR Downsizing and Lower ESR, 2,000hours at 105 Rated voltage range : 6.3 to 50V, Nominal capacitance range : 22 to 2,200F Downsized Solvent resistant type(see PRECAUTIONS AND GUIDELINES) MZJ Vibration resistance structure RoHS2 Compliant AEC-Q200 compliant : Please contact Chemi-Con for more details, test data, information. SPECIFICATIONS Items Characteristics Category -55 to +105 Temperature Range Rated Voltage Range 6.3 to 50V dc Capacitance Tolerance 20% (M) (at 20, 120Hz) Leakage Current I=0.01CV or 3A, whichever is greater. Where, I : Max. leakage current (A), C : Nominal capacitance (F), V : Rated voltage (V) (at 20 after 2 minutes) Dissipation Factor Rated voltage (Vdc) 6.3V 10V 16V 25V 35V 50V (tan) tan(Max.) 0.26 0.19 0.16 0.14 0.12 0.10 (at 20, 120Hz) Low Temperature Rated voltage (Vdc) 6.3V 10V 16V 25V 35V 50V Characteristics Z(-25)/Z(+20) 2 2 2 2 2 2 (Max. Impedance Ratio) Z(-40 )/Z(+20 ) 3 3 3 3 3 3 Z(-55)/Z(+20) 4 4 4 3 3 3 (at 120Hz) Endurance The following specications shall be satised when the capacitors are restored to 20 after the rated voltage is applied for 2,000 hours at 105. Capacitance change 30% of the initial value D.F. (tan) 200% of the initial specied value Leakage current The initial specied value Shelf Life The following specications shall be satised when the capacitors are restored to 20 after exposing them for 1,000 hours at 105 without voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4. Capacitance change 30% of the initial value D.F. (tan ) 200% of the initial specied value Leakage current The initial specied value Surge Voltage Test The capacitors shall be subjected to 1,000 cycles each consisting of charging with the specied surge voltage for 305 seconds through a protective resistor (as required for RC=0.1 0.05sec) and open-circuiting for 5.5 minutes at a room temperature of 15 to 35 . Rated voltage (Vdc) 6.3 10 16 25 35 50 Surge voltage (Vdc) 7.2 12 18 29 40 58 Appearance No signicant damage Capacitance change 20% of the initial value D.F. (tan ) 200% of the initial specied value Leakage current The initial specied value (Caution) Surge Voltage Test intends to evaluate capacitors in durability of an exceptional excessive voltage under specic conditions.It does not imply long-term use at all. DIMENSIONS mm Terminal Code : A Terminal Code : G(Vibration resistant structure) Size code : E61 to JA0 Size code : F61 to JA0 Size code D L A B C W P E61 5 5.8 5.3 5.3 5.9 0.5 to 0.8 1.4 0.3max. W Vent for JA0 Vent for JA0 F61 6.3 5.8 6.6 6.6 7.2 0.5 to 0.8 1.9 W F80 6.3 7.7 6.6 6.6 7.2 0.5 to 0.8 1.9 HA0 8 10.0 8.3 8.3 9.0 0.7 to 1.1 3.1 JA0 10 10.0 10.3 10.3 11.0 0.7 to 1.1 4.5 L0.3 (Note) A0.2 0.3max. A0.2 Note : L0.5 for HA0 and JA0 L0.3 (Note) Note : L0.5 for HA0 and JA0 : Dummy terminals MARKING EX) 35V330F Rated voltage symbol Rated voltage (Vdc) 6.3 10 16 25 35 50 3Q Symbol j A C E V H 330 ZR V Applying voltage over the rated voltages causes the capacitors to have short lifetime. Besides, applying voltage over the specied surge voltages may cause to have short circuit failure. A protection circuit should be used if applied voltage will exceed the rated voltages. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Ver.3 04-2.indd 109 2020/11/16 9:36:01 D0.5 B0.2 P C0.2 D0.5 B0.2 P C0.2SURFACE MOUNT ALUMINUM ELECTROLYTIC CAPACITORS Low ESR, 105 Upgrade TM AIchip - MZRSeries PART NUMBERING SYSTEM 1 2 3 4 5 6 78 9 10 11 12 13 14 15 16 17 18 E MZR AAA A RA AAA M AAA G Supplement code Size code Capacitance tolerance code Capacitance code (ex. 220F:221, 470F:471) Taping code Terminal code (A, G) Voltage code (ex. 6.3V:6R3, 10V:100, 35V:350) Series code Category Please refer toProduct code guide (surface mount type STANDARD RATINGS WV Cap ESR Rated ripple current Size code tan Part No. (Vdc) (F) ( max./20 , 100kHz) (mArms/105 , 100kHz) 220 E61 0.26 0.36 240 EMZR6R3ARA221ME61G 330 F61 0.26 0.26 300 EMZR6R3RA331MF61G 6.3 680 F80 0.26 0.16 600 EMZR6R3RA681MF80G 1,500 HA0 0.26 0.08 850 EMZR6R3 RA152MHA0G 2,200 JA0 0.26 0.06 1,190 EMZR6R3 RA222MJA0G 150 E61 0.19 0.36 240 EMZR100ARA151ME61G 220 F61 0.19 0.26 300 EMZR100RA221MF61G 10 470 F80 0.19 0.16 600 EMZR100RA471MF80G 1,000 HA0 0.19 0.08 850 EMZR100RA102MHA0G 1,500 JA0 0.19 0.06 1,190 EMZR100 RA152MJA0G 100 E61 0.16 0.36 240 EMZR160ARA101ME61G 220 F61 0.16 0.26 300 EMZR160 RA221MF61G 16 330 F80 0.16 0.16 600 EMZR160RA331MF80G 680 HA0 0.16 0.08 850 EMZR160RA681MHA0G 1,000 JA0 0.16 0.06 1,190 EMZR160RA102MJA0G 68 E61 0.14 0.36 240 EMZR250ARA680ME61G 100 F61 0.14 0.26 300 EMZR250RA101MF61G 25 220 F80 0.14 0.16 600 EMZR250RA221MF80G 470 HA0 0.14 0.08 850 EMZR250RA471MHA0G 820 JA0 0.14 0.06 1,190 EMZR250RA821MJA0G 47 E61 0.12 0.36 240 EMZR350ARA470ME61G 100 F61 0.12 0.26 300 EMZR350RA101MF61G 35 150 F80 0.12 0.16 600 EMZR350 RA151MF80G 330 HA0 0.12 0.08 850 EMZR350 RA331MHA0G 560 JA0 0.12 0.06 1,190 EMZR350 RA561MJA0G 22 E61 0.10 0.88 165 EMZR500ARA220ME61G 47 F61 0.10 0.68 195 EMZR500RA470MF61G 50 100 F80 0.10 0.34 350 EMZR500RA101MF80G 220 HA0 0.10 0.18 670 EMZR500RA221MHA0G 330 JA0 0.10 0.12 900 EMZR500RA331MJA0G : Enter the appropriate terminal code. RATED RIPPLE CURRENT MULTIPLIERS Frequency Multipliers Frequency(Hz) 120 1k 10k 100k Capacitance(F) 22 to 150 0.40 0.75 0.90 1.00 220 to 560 0.50 0.85 0.94 1.00 680 to 2,200 0.60 0.87 0.95 1.00 The endurance of capacitors is reduced with internal heating produced by ripple current at the rate of halving the lifetime with every 5 rise. When long life performance is required in actual use, the rms ripple current has to be reduced. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U Ver.3 04-2.indd 110 2020/11/16 9:36:02