CHEMTRONICS TDS CW7100 Technical Data Sheet CircuitWorks Silver Conductive Grease PRODUCT DESCRIPTION TYPICAL PRODUCT DATA AND PHYSICAL PROPERTIES CircuitWorks Silver Conductive Grease Composition provides maximum electrical and thermal Material 100% Silver Filled conductivity, proven lubrication properties, Silicone Grease and protection from moisture, oxidation, and Color Silver/Gray other environmental hazards. This system Consistency Smooth Paste utilizes an advanced silicone lubricant that is Properties compatible with metal, rubber, and plastic. Volume resistivity <0.01 ohm-cm High electrical conductivity Excellent thermal conductivity Thermal Conductivity 2 (BTU-in/hr-ft - F) 38.8 Provides protection against wear 2 -2 (CAL-cm/sec-cm - C) 1.3 x 10 Remains stable in a wide temperature ( W/mK) 5.6 range -70 to 485 F (-57 to 252 C) Operating Temperature -70 to 485 F Protects against moisture and corrosion Range (-57 to 252 C) Very low viscosity vs. temperature Unworked Penetration 210 change (ASTM D-1403) 77F Worked Penetration 250 TYPICAL APPLICATIONS (ASTM D-1403, 60 Strokes) CircuitWorks Silver Conductive Grease Dropping Point 491 F (255 C) may be used for high and low power (ASTM D-2266) applications including: Steel on Steel Wear 1.5mm Lubrication of Substation Switches or (ASTM D-2266) Circuit Breakers Corrosion on Copper None Heat Dissipation from Transformers Moisture Resistance Excellent Low or Medium Speed Sliding Chemical Resistance Excellent Contacts Electrical Conductivity Excellent Static Grounding on Seals or O-Rings Thermal Conductivity Excellent Extending the Life of Rotating Lubrication Properties Excellent Switches Protection from Oxidation Excellent Power Rating High/Low Shelflife 2 years RoHS/WEEE Status COMPATIBILITY AVAILABILITY CircuitWorks Silver Conductive Grease is CW7100 6.5g / 0.23 oz. Syringe generally compatible with metal, rubber, and plastic. As with any compound, compatibility with substrate should be TECHNICAL & APPLICATION determined on a non-critical area prior to ASSISTANCE use. ITW Chemtronics provides a technical hotline to answer your technical and application related USAGE INSTRUCTIONS questions. The toll free number is: 1-800-TECH- 401. Surface Preparation: For best results, clean parts to be lubricated with NOTE: Chemtronics Electro-Wash PX cleaner in This information is believed to be accurate. It is order to remove any surface contamination intended for professional end users having the skills which may prevent adequate material to evaluate and use the data properly. ITW contact. CHEMTRONICS does not guarantee the accuracy of the data and assumes no liability in connection Thinning: Do not attempt to thin. with damages incurred while using it. Application: Syringe: Remove cap and gently press on MANUFACTURED BY: ITW CHEMTRONICS plunger. Apply CircuitWorks Silver 8125 COBB CENTER DRIVE Conductive Grease directly to surface or use KENNESAW, GA 30152 application tip. 1-770-424-4888 REV. H (06/06) Clean-Up: Electro-Wash PX cleaner can be used to remove trace residues. Excess material may also be removed using a wipe DISTRIBUTED BY: such as the Chemtronics ControlWipes . Silver particles may stain porous materials. WARNING: To avoid shock or possible fire, stop power to any system before applying conductive grease. Insure positive and negative contacts remain isolated. Improper use can result in shorting, arcing, or shock.