LDP25A360-P070BR

V21 LDP25 SERIES 25 WATT OUTPUT LED POWER SUPPLY Features * 25W Single Outputs * Universal AC Input Range 90~305Vac * Constant Current Design * Active PFC > 0.9 * Low Inrush Current < 5A * Standby Power Consumption <0.5W * Low profile with 20mm Height and Narrow 30mm Width * Low Frequency Flicker Design * Continuous Short Circuit Protection * Over Temperature Protection * IP 67 Rated * Fully Isolated Plastic Case * Dimming Function: PWM/1~10VDC Constant Ripple and Output No Load Output Output Rated %EFF. MODEL Current Noise(V p-p Rated Output Rated Voltage (typ.) Region max.) Current Voltage (max.) Power 24V 9-24V 0.24V LDP25S240-C110BR 86% 1100mA 29V 26.40W 24V 16-24V 2.0V LDP25S240-C110B 88% 24V 9-24V 0.24V LDP25S240-C105BR 85% 1050mA 29V 25.20W 24V 16-24V 2.0V LDP25S240-C105B 87% 24V 9-24V 0.24V LDP25S240-C070BR 84% 700mA 29V 16.80W 24V 16-24V 2.0V LDP25S240-C070B 86% 36V 9-36V 0.36V LDP25S360-C070BR 86% 700mA 43V 25.20W 36V 24-36V 2.7V LDP25S360-C070B 88% 48V 9-48V 0.48V LDP25S480-C053BR 86% 530mA 56V 25.44W 48V 32-48V 4.8V LDP25S480-C053B 88% 48V 9-48V 0.48V LDP25S480-C035BR 84% 350mA 56V 16.80W 48V 32-48V 4.8V LDP25S480-C035B 86% All specifications are Typical at nominal line , full load and 25C unless otherwise noted 1 V21 : Order Information Series Output(W) IP Code Output Voltage Dimming Function Rated Output Current Input Voltage Ripple Nosie LDP 25 X XXX X XXX B X 110: 1100mA 24024V 24V 105: 1050mA 070: 700mA SSingle O/P with IP64 36V 360 36V 070: 700mA 053: 530mA R1% output 48048V 48V ripple and noise 035: 350mA CNo dimming B100-277 Vac or PPWM/1-10V, 110: 1100mA Blank 10% output ripple and noise 24024V 24V 105: 1050mA 070: 700mA ASingle O/P with IP67 36036V 36V 070: 700mA 053: 530mA 48048V 48V 035: 350mA Specifications LDP25 Series Derating Curve INPUT SPECIFICATIONS: AC Input Voltage ........................................................... 90~305Vac Frequency ...... 47 to 63Hz Power Factor . PF 0.9 115Vac/230Vac, 75%~100% Load P F 0 . 9 2 7 7 V a c , 1 0 0 % L o a d Inrush Current .... <5A After 100s 240Vac, 25 Ta Cold Start Leakage Current .......... 0.5mA max. Standby Power Consumption ..... <0.5W Input Current (Full Load) ... 0.3A/0.14A typ 115Vac/230Vac OUTPUT SPECIFICATIONS: Maximum Output Voltage See Table Constant Current Accuracy (note1) .....5% max. Current Line Regulation (note2) .... 5% max. Current Load Regulation (note3) ...... 5% max. Start up Time ..... 0.5 second max. Over Voltage Protection .......... TVS Clamp SAFETY AND EMISSIONS: Short Circuit Protection .... Hiccup Mode, Auto Recovery Safety ......................................... UL8750, IEC61347-1, IEC61347-2-13 EMI .............. FCC Part 18/EN55015 Class B GENERAL SPECIFICATIONS: Efficiency ...... See Table EMS ................................. EN61547,EN61000-4-2, 3, 4, 5,6, 8, 11 Temperature .......................................... 0.05%/(0~50) EN61000-3-2 Harmonic Class C, EN61000-3-3 Isolation Voltage, Input to Output .... 3.75KVac NOTE: 8 Isolation Resistance, Input to Output .. 10 min. 1. Current accuracy is set at nominal input voltage and full load. Operating Ambient Temperature .............. -40C~70C(See Derating Curve) 2. Current line regulation is measured from high line to low line with full load. Cooling.... Natural Convection 3. Current load regulation is measured minimum to maximum of the Storage Temperature.................................... -40 ~ 85 constant current region. Operating Humidity ....... 20%~95% RH Non-Condensing. 4. All specifications are typical at 230Vac, vo max., full load and 25 Ta Operating Altitude Max Sea Level to 3000m unless other noted. 5. The input/output wires accessibility shall be evaluated during final MTBF, MIL-HDBK-217F (25 Ta) ...................................... 200Khrs system assembly. MECHANICAL CHARACTERISTICS: Dimensions ....... 5.511x1.181x0.787 Inches (140.00x30.00x20.00mm) Weight .. 100g All specifications are Typical at nominal line , full load and 25C unless otherwise noted 2