Product Preview 1 February 2018 EV6180/EV6380 Evaluation Kit for CMX608 and CMX618 The EV6180 Evaluation Kit provides the means to demonstrate and evaluate the operation of CMX6x8 full and half duplex RALCWI Vocoder ICs. The board is operated from a single, external power supply. Features On-board voltage regulators provide the required analogue and digital supply voltages. Evaluation Platforms for CMX608, CMX618 To use this software, a host PC and the PE0003 and CMX638 RALCWI Vocoder ICs EvKit Interface Card are required. Additionally, an Stereo Jack Socket Microphone Connections external audio codec is required to demonstrate to/from Integral Audio Codec the CMX608 opoti n. Single-ended or Differential Audio Codec I/O Provided with Host PC Sowarft e to Connectors are provided to allow direct Demonstrate Device Performance interfacing to the C-BUS and SPI interfaces on the Header Connections to the C -BUS Interface: CMX6x8 devices. The on-chip audio codec for EvKit Interface Card or Third Party (CMX618 and CMX638) is accessible through two Microcontroller (Not Supplied) 3.5mm stereo jack sockets. Header Connections to the SPI Interface: for The audio codec signal paths can be configured as Use With External Third Party Codecs single-ended or differential. PE0003 Scripts Available Supply Requirement Single +5V dc supply Applications Evaluation, demonstration and experimentation of the CMX608, CMX618, CMX638 RALCWI Vocoder ICs Optional Supporting Products PE0003 EvKit Interface Card EV6180 (Not supplied with this kit, can be ordered separately) For further informaoti n, please refer to the Design Resources secoti n on the CMX608 or CMX618 product page at cmlmicro.com Find: Distributor Visit: www.cmlmicro.com WHAT TO DO NEXT CML Microcircuits Benefits Faster time to market Product Longevity Developing proven high performance and field tested ASSP ICs, CML is helping Designing with CML products, manufacturers are rewarded with longer engineers to cope with increasing product life cycles and a stable BOM, ensuring minimum engineering costs pressure in delivering shorter project design cycles. and maximum profit. Design flexibility Low Power CMLs FirmASIC reconfigurable technology with the use of a Funconti Image Being at the forefront of low power chip technology, manufacturers can upload enables a single hardware plaorm ttf o be used for mulpti le develop smaller equipment with extended battery life. communicaonti s systems. High Quality Superior Support With 100% of products being tested before shipping, Internal and field based applicaonti s teams worldwide customers are assured of the highest reliability. provide focused customer support to ease the development process. United Kingdom Tel: +44 (0) 1621 875500 email: sales cmlmicro.com United States Tel: +1 336 744 5050 email: us.sales cmlmicro.com www.cmlmicro.com Singapore Tel: +65 62888129 email: sg.sales cmlmicro.com 2018 CML Microsystems Plc