Web Sample Tools & Support Document 422-1 page & buy software & FAQ Chip Inductors 0402AF Series (1005) Higher inductance values than other 0402 inductors Ferrite construction for high current handling 23 inductance values from 20 nH to 560 nH Impedance typ (Ohms) 2 3 4 5 Inductance SRF typ DCR max Irms 1 Part number 5% (nH) 900 MHz 1.7 GHz (MHz) (Ohms) (mA) 0402AF-200XJL 20 83 118 2600 0.050 1600 0402AF-220XJL 22 96 146 2500 0.065 1300 0402AF-330XJL 33 142 207 2300 0.060 1400 0402AF-360XJL 36 157 249 2300 0.075 1300 0402AF-390XJL 39 173 263 2200 0.115 830 0402AF-510XJL 51 218 330 1930 0.070 1100 0402AF-560XJL 56 239 360 1900 0.095 1000 0402AF-720XJL 72 311 453 1650 0.100 1000 0402AF-780XJL 78 344 522 1600 0.130 970 0402AF-101XJL 100 513 850 1400 0.160 900 0402AF-141XJL 140 629 949 1220 0.260 630 0402AF-181XJL 180 832 1270 1150 0.280 560 0402AF-201XJL 200 1110 1890 1000 0.440 400 0402AF-221XJL 220 1050 1560 1150 0.530 380 0402AF-251XJL 250 1230 1940 900 0.360 520 0402AF-271XJL 270 1320 1960 860 0.550 360 0402AF-301XJL 300 1550 2230 860 0.410 420 0402AF-331XJL 330 1850 2880 820 0.560 350 0402AF-361XJL 360 1920 2640 810 0.575 360 0402AF-391XJL 390 2350 2970 760 0.750 300 0402AF-421XJL 420 2270 2800 700 0.700 340 0402AF-471XJL 470 2680 3010 650 0.730 310 0402AF-561XJL 560 3620 3110 600 0.920 200 1. When ordering, please specify termination and packaging codes: Designers Kit C397 contains 20 each of all values Core material Ferrite 0402AF-561XJLW Terminations RoHS compliant gold over nickel over silver-palladium- Termination: L = RoHS compliant gold over nickel over silver-palladi- glass frit. Other terminations available at additional cost. um-glass frit. Special order: T = RoHS tin-silver-copper (95.5/4/0.5) Weight 0.9 1.1 mg or S = non-RoHS tin-lead (63/37). Ambient temperature 40C to +85C with Irms current Packaging: W = 7 machine-ready reel. EIA-481 punched paper Maximum part temperature +100C (ambient + temp rise) Derating. tape (2000 parts per full reel). Q = 7 machine-ready reel. EIA-481 punched paper Storage temperature Component: 40C to +100C. tape (5000 parts per full reel). Tape and reel packaging: 40C to +80C U = Less than full reel. In tape, but not machine ready. Resistance to soldering heat Max three 40 second reflows at To have a leader and trailer added ( 25 charge), +260C, parts cooled to room temperature between cycles use code letter W instead. Temperature Coefficient of Inductance (TCL) +25 to +150 ppm/C 2. Inductance measured at 7.9 MHz, 0.1 Vrms, using an Agilent/HP 4286A LCR meter or equivalent with a Coilcraft SMD-F test fixture and Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30C / Coilcraft-provided correlation pieces. 85% relative humidity) 3. SRF measured using Agilent/HP 8753D network analyzer and Coilcraft Failures in Time (FIT) / Mean Time Between Failures (MTBF) SMD -D test fixture. One per billion hours / one billion hours, calculated per Telcordia SR-332 4. DCR measured on Cambridge Technology micro-ohmmeter and a Packaging 2000 or 5000 per 7 reel. Paper tape: 8 mm wide, Coilcraft CCF858 test fixture. 0.68 mm thick, 2 mm pocket spacing 5. Current that causes a 15C temperature rise from 25C ambient. Because of their open construction, these parts will not saturate. This PCB washing Tested to MIL-STD-202 Method 215 plus an additional information is for reference only and does not represent absolute aqueous wash. See Doc787 PCB Washing.pdf. maximum ratings. Click for temperature derating information. Refer to Doc 362 Soldering Surface Mount Components before soldering. Document 422-1 Revised 10/12/15 US +1-847-639-6400 sales coilcraft.com UK +44-1236-730595 sales coilcraft-europe.com Coilcraft Inc. 2017 This product may not be used in medical or high Taiwan +886-2-2264 3646 sales coilcraft.com.tw risk applications without prior Coilcraft approval. China +86-21-6218 8074 sales coilcraft.com.cn Specification subject to change without notice. Singapore + 65-6484 8412 sales coilcraft.com.sg Please check web site for latest information.Document 422-2 Chip Inductors 0402AF Series Typical Q vs Frequency Typical L vs Frequency 16 1000 560 nH 14 560 nH 270 nH 100 nH 12 100 nH 100 56 nH 10 56 nH 20 nH 8 270 nH 20 nH 6 10 4 2 1 0 0.001 0.01 0.1 110 110 100 Frequency (GHz) Frequency (MHz) B H overall Typical Impedance vs Frequency C Pick and place F E material 10000 560 nH A G 270 nH 1000 100 nH E F 56 nH Terminal wraparound: D approx 0.007/0,18 both ends 20 nH terminal Recommended 100 LandPattern A max B max C max D E F G H 0.044 0.026 0.026 0.020 0.009 0.017 0.018 0.026 inches 10 1,12 0,66 0,66 0,51 0,23 0,43 0,46 0,66 mm Note: Height dimension (C) is before optional solder application. For maximum 1 height dimension including solder, add 0.006 in / 0,152 mm. 0.1 0.001 0.01 0.1 110 Frequency(GHz) Document 422-2 Revised 10/12/15 US +1-847-639-6400 sales coilcraft.com UK +44-1236-730595 sales coilcraft-europe.com Coilcraft Inc. 2017 This product may not be used in medical or high Taiwan +886-2-2264 3646 sales coilcraft.com.tw risk applications without prior Coilcraft approval. China +86-21-6218 8074 sales coilcraft.com.cn Specification subject to change without notice. Singapore + 65-6484 8412 sales coilcraft.com.sg Please check web site for latest information. Impedance(Ohms) Inductance (nH) Q Factor