8L02-05-00 Coto

8L SERIES/SPARTAN DIP REED RELAYS 8L Series Economy DIP Reed Relays e CTh oto 8L Spartan Series relays combine Coto quality and economy in the industry standard 14 pin molded DIP package. This series will cross to all competitive DIP packages and is ideal for telecom, security, and other general purpose applications. 8L Series Features u Drop-in low cost replacement for industry standard DIP packages u Contact forms 1A, 2A and 1C available u Available coils in 5V, 12V and 24V u Molded thermoset body on integral lead frame design u Hermetically Sealed Contacts u Optional Electrostatic Shield and Coil Suppression Diode u UL File E67117 - Contact factory for details u RoHS compliant DIMENSIONS in Inches (Millimeters) Model 8L01, 8L02 & 8L41 Model 8L61 14 13 9 8 14 13 9 8 IDENTIFIES PIN 1 1 2 6 7 1 2 6 7 .775 Max270 (19.50) (6.58) (19.68) Max775 .300 (7.62) .260 (6.60) IDENTIFIES PIN 1 .270 .013 (0.33) (6.85) .080 Typ. (2.00) .300 (7.62) .100 .260 (2.54) .360 .500 (6.60) (9.14) (12.7) .600 (15.24) .140(3.55) .015 (0.38) .100 (2.54) .020 .333 (0.51) (8.46) .600(15.24) Ordering Information 8LXX-XX-XX1 Part Number 3 Alternate Package 1 for 8L01, 8L02 & 8L41 Alternate Package 2 for 8L01, 8L02 & 8L41 Model Number Diode Option 8L01 8L41 8L61 0=No Diode 1=Diode 14 13 9 8 14 13 9 8 4 Coil Voltage Shield Option 05=5 volts 0=No Shield 12=12 volts 1=Electrostatic Shield 1 2 6 7 12 6 7 24=24 volts .77(19.60) Max768 (19.50) Max. IDENTIFIES PIN 1 .27 .276(7.00) (6.90) Max. Ordering Information .27 .016 (6.90) Max. (.40) .217(5.50) 8LXX-XX-XX Part Number 3 Model Number Diode Option .125(3.18) .118 .015 .020(.50) .010(.25) (0.38) (3.00) 8L02 .355 0=No Diode 1=Diode .100(2.54) .305(7.75) .018 (8.50) .100(2.54) (0.46) .600(15.24) .600(15.24) .350(8.9) MAX 4 Coil Voltage Shield Option 05=5 volts 0=No Shield 12=12 volts 1=Electrostatic Shield 24=24 volts 06292019 tteell: (: (440011) 94) 9433..2266886 f6 faaxx: (: (440011) 94) 9422..090922002,3,4 2,3,4 2,3,4 2,3,4,5 8L01 8L02 8L41 8L61 MODEL NUMBER Parameters Test Conditions Units 1 Form A 2 Form A 1 Form C 1 Form C COIL SPECS. Nom. Coil Voltage VDC 5 12 24 5 12 24 5 12 24 5 12 24 Max. Coil Voltage VDC 6.5 15 32 6.5 15 32 6.5 15 32 6.5 15 32 Coil Resistance +/- 10%, 25 C 500 500 2150 200 500 2000 200 500 2000 200 500 2000 Operate Voltage Must Operate by VDC - Max. 3.8 9.6 19.2 3.8 9.6 19.2 3.8 9.6 19.2 3.8 9.6 19.2 Release Voltage Must Release by VDC - Min. 0.5 1.0 2.0 0.5 1.0 2.0 0.5 1.0 2.0 0.5 1.0 2.0 CONTACT RATINGS Switching Voltage Max DC/Peak AC Resist. Volts 200 200 100 100 Switching Current Max DC/Peak AC Resist. Amps 0.5 0.5 0.25 0.25 Carry Current Max DC/Peak AC Resist. Amps 1.0 1.0 0.5 0.5 Contact Rating Max DC/Peak AC Resist. Watts 10 10 3 3 1 6 Life Expectancy-Typical Signal Level 1.0V, 10mA x 10 Ops. 500 500 100 100 Static Contact 50mV, 10mA 0.150 0.150 0.200 0.200 Resistance (max. init.) Dynamic Contact 50mV, 50mA N/A N/A N/A N/A Resistance (max. init.) at 100 Hz, 1.5 msec RELAY SPECIFICATIONS Insulation Resistance Between all Isolated Pins 10 10 9 9 10 10 10 10 (minimum) at 100V, 25C, 40% RH No Shield pF 0.5 0.5 1.5 1.5 Capacitance - Typical Shield Floating pF 1.0 0.5 1.5 1.5 Across Open Contacts Shield Guarding pF 0.5 0.2 1.0 1.0 No Shield pF 1.5 1.5 1.5 1.5 Open Contact to Coil Shield Floating pF 2.0 2.0 2.0 2.0 Shield Guarding pF 0.5 0.5 0.5 0.5 No Shield Contact to Shield Shield Floating pF 2.0 1.5 2.0 2.0 Shield Guarding Between Contacts VDC /peak AC 250 250 200 200 Dielectric Strength Contacts to Shield VDC/peak AC 1500 1500 1500 1500 (minimum) Contacts/Shield to Coil VDC/peak AC 1500 1500 1500 1500 Operate Time - including At Nominal Coil Voltage, msec. 0.5 0.5 1.0 1.0 bounce - Typical 30 Hz Square Wave Release Time - Typical No Suppression msec. 0.5 0.5 1.0 1.0 1 14 1 14 1 14 1 14 To p V i e w : 2 2 2 2 13 13 13 13 Dot stamped on top of relay refers to pin 1 location Grid = .1x.1 (2.54mm x 2.54mm) 6 9 6 9 6 9 6 9 7 8 7 8 7 8 7 8 Notes: 1 Consult factory for life expectancy at other switching loads. 2 Molded depression on top of relay refers to pin 1 location. 3 Environmental Ratings: Optional coil suppression diode across pins 2(+) and 6(-). + + 4 Storage Temp: -35C to 100C Operating Temp: -20C to 85C Optional ES Shield is tied to pin 9. 5 Solder Temp: 270C max 10 sec. max Surface mount processing temperature: 260C max for 1 All electrical parameters measured at 25C unless otherwise specified. minute dwell time. Temperature measured on lead where Vibration: 20 Gs to 2000 Hz Shock: 50 Gs lead exits molded package. 06292019 FForor m moostst re recceenntt d daattaa vis visitit w wwwww.c.cotoreotorellaayy.c.comom CCOOTTO TO TEECCHHNNOOLLOGOGYY, I, INCNC..