CLD-DS36 Rev 9F Product family data sheet Cree XLamp MT-G EasyWhite LEDs Pro DuCT DEsCriPTion FEATurEs TAbLE o F Con TEn Ts Cree easyWhite color temperatures The XLamp MT-G easyWhite LeD Characteristics ....................................... 2 from 2700K to 5000K CCT maximizes lumen density, eliminates Flux Characteristics, easyWhite Order Wide range of operating power - up chromaticity binning and enables Codes and Bins 6V .............................. 3 to 25W luminaire and bulb manufacturers to Flux Characteristics, easyWhite Order 85C binning and characterization deliver consistent color and highefficacy Codes and Bins 36V ............................ 5 Two voltage options: 6V, 36V light output in a new, compact, multi-die Relative Spectral Power Distribution .... 7 Low effective thermal resistance: package. XLamp MT-G easyWhite LeDs Relative Luminous Flux vs. Junction 1.5C/W can reduce LeD-to-LeD color variation Temperature ........................................... 7 High lumen density to within a 2-step MacAdam ellipse, electrical Characteristics ....................... 8 Wide viewing angle: 120 94% smaller than the total area of the Relative Luminous Flux vs. Current ....... 9 80minimum CRI at 2700K and corresponding ANSI C78.377 color region. Typical Spatial Distribution .................. 10 3000K CCT Performance Groups Brightness ..... 10 85 and 90minimum CRI available in The XLamp MT-G easyWhite LeD is the Performance Groups Chromaticity .. 11 2700K and 3000K CCT perfect choice for lighting applications Cree easyWhite Color Temperatures electrically neutral thermal path where high luminous flux output is Plotted on the 1931 CIe Curve ............ 12 RoHS and ReACh compliant required from a single, small point source. Bin and Order Code Formats ............... 12 UL recognized component example applications include: LeD Reflow Soldering Characteristics ........ 13 (e349212) retrofit bulbs, commercial/retail display Notes .................................................... 14 spotlights, and other indoor general Mechanical Dimensions ...................... 16 illumination applications. APPLiCATions Tape and Reel ....................................... 17 Packaging ............................................. 18 MR, PAR and other directional retrofit bulbs Commercial/residential directional lighting General illumination Copyright 2011-2017 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree , XLamp and Cree, Inc. EasyWhite are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL and the UR logo are registered trademarks of UL LLC. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 WWW.CREE.Com/XLAmp XLamp mT-G EasyWhiTE LED Ch ArACTErisTiCs Characteristics unit Minimum Typical Maximum viewing angle (FWHM) degrees 120 eSD withstand voltage (HBM per Mil-Std-883D) v 8000 effective thermal resistance, junction to solder point C/W 1.5 LeD junction temperature C 150 DC forward current (6V) mA 1100 4000 DC forward current (36V) mA 185 700 Forward voltage (6V, 1100mA, 85C) v 5.6 6.7 Forward voltage (36V, 185mA, 85C) v 33.5 40.2 Temperature coefficient of voltage (6V) mV/C 4.5 Temperature coefficient of voltage (36V) mV/C -27 Reverse voltage (6V) v 5 Reverse current (6V, 36V) mA 0.1 Copyright 2011-2017 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree , XLamp and EasyWhite are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL and the UR logo are registered trademarks of UL LLC. 2