80149606 Crouzet

02/11/2015 www.crouzet.com 30 and 40 W - 50 Nm - Planetary 62 mm 801496 SNi10 Part number Contact us With or without integrated control electronics Output in motor shaft Ideal for high reduction ratios Ideal for high-torque applications Excellent efficiency Reversible movement Part numbers With built-in electronic Without built-in control, with Hall effect Number of Ratios Output speed (rpm) 24 V Available torque Type control sensors stages (i) DC (Nm) 801496 80149606 SNi10 - 3 307,5 7 30 SNi10 Specifications General characteristics Motor 801400 Nominal motor power at 24 V (W) 30 W Axial load dynamic (N) 100 Radial load dynamic (N) 50 / 70* / 120** Efficiency (%) 90 / 80* / 70** Gearbox case temperature rise (C) 35 Weight (g) 1600 / 1900* / 2200** Protection index IP54 Comments Dimensions (mm) 801496 with SNi10 o N Legend Length of cable 400 10 mm 4 holes M5 depth 10 at 90 over 52 Fixing hole M5, depth 12.5 Key A5 x 5 x 18 DIN 6885 A L1 1 stage: 45.7 mm max. L1 2 stages: 61.5 mm max. L1 3 stages: 77.4 mm max. Precautions for use The limits and precautions for use described in the 30 W brushless motor section must be observed. Product adaptations Unless otherwise specified, the characteristics given are applicable to all or part of the product range selected02/11/2015 www.crouzet.com With integrated electronic controls SNi10 or TNi20 No lead output but connector in motor Dimensions of gearbox shaft Cable length, with or without connector Open-loop control in 2 quadrants Low-noise version Other windings Other reduction ratios Mechanical holding brake Unless otherwise specified, the characteristics given are applicable to all or part of the product range selected