CPM-2F CUI Devices

Additional Resources: Product Page 3D Model date 11/05/2019 page 1 of 3 MODEL: CPM-2F DESCRIPTION: PELTIER COOLING UNIT FEATURES arcTEC structure better seal structure for water resistance and absorption of thermal stress easy installation no screws to tighten result in better heat absorption and maximum performance RoHS input input output output MODEL 1 2 2 voltage current Qmax Tmax max max T =50C T =50C h h (V) (A) (W) (C) CPM-2F 12 6 46 73 Notes: 1. at inverse voltage,cold side plat becomes hot side plate 2. maximum cooling capacity at I , V , and T=0C max max 3. maximum temperature difference at I , V , and Q=0W (maximum parameters are measured in a vacuum) max max SPECIFICATIONS parameter conditions/description min typ max units 4 internal resistance 1.85 2.35 cold side plate -20 60 C Notes: 4. measured by AC 4-terminal method at 25C SAFETY & COMPLIANCE parameter conditions/description min typ max units isolation voltage for 1 second 1,200 Vac insulation resistance input to output at 250 Vdc 10 M RoHS yes ENVIRONMENTAL parameter conditions/description min typ max units operating temperature 0 35 C storage temperature -20 70 C operating humidity 30 85 % storage humidity 10 90 % For further information and product selection refer to peltier applicaftion notes.pdf cuidevices.comAdditional Resources: Product Page 3D Model CUI Devices MODEL: CPM-2F DESCRIPTION: PELTIER COOLING UNIT date 11/05/2019 page 2 of 3 ( ) CPM-2F PERFORMANCE Th=50C 6 A 16.0 5 A 4 A 3 A 8.0 2 A 1 A 0 6 A 40.0 5 A 4 A 30.0 3 A 2 A 20.0 10.0 1 A 0 MECHANICAL parameter conditions/description min typ max units weight 200 g cooling medium aluminum heat radiation medium aluminum MECHANICAL DRAWING units: mm 55.0 2.165 tolerance: 0.3 mm 51.0 2.008 44.5 1.752 8.5 0.335 COOLING SURFACE VENDOR: JST 27.0 1.063 PART NO: VHR-2N RADIATING SURFACE 6.0 0.236 6.0 0.236 70.0 2.756 385.0 (15.16) 4.30.169 32.0 1.260 0.2 +20.0 (4 PLCS) (2 PLCS) -10.0 60.0 2.362 0.2 (2 PLCS) M4X7 (4 PLCS) cuidevices.com Heat Pumped (W) Voltage Input (V)