Ships to you between Fri. 17 May to Thu. 23 May
FC-051PK18S2E20H3XXCXXXSXXX Danfoss
Module: presostat; pressure; 1÷10 bar; Kind of outputs: SPDT Stock : 2
Auxiliary contacts; Auxiliary contacts: NC x2; front Stock : 1
Auxiliary contacts; Auxiliary contacts: NO x2; side Stock : 1
Auxiliary contacts; Auxiliary contacts: NO; side Stock : 1
180L0101 Stock : 1
180L0100 Stock : 1
180L0001 Stock : 0
180L0011 Stock : 0
180L0049 Stock : 0
2/2-Way Directional Control Valves, Type V D H 30 EC Stock : 0
Motor Drives MAN-START 600VAC 38A COMBO BLOCK Stock : 1
Motor Drives ASSY; BRUSH/SHUNT SR400 Stock : 1
Motor Drives BLANKING COVER MODULE SLOT Stock : 0
Motor Drives MAN-START TERMINAL EXTENSION KIT IEC Stock : 0
Motor Drives MAN-START BUSBAR 600VAC 63AMP IEC Stock : 5
Motor Drives KIT; (3) BRUSHES REPLACEMENT Stock : 0
Motor: AC Stock : 1
Schneider Electric Stock : 1
Schneider Electric Stock : 0
Motor Drives PRE-WIRED CONTROL MODULE - LUB/LUS Stock : 0
The Danfoss FC-051PK18S2E20H3XXCXXXSXXX is a Vector inverter with a maximum motor power of 0.18kW and an input voltage of 200 to 240VAC (6). It is designed to enable precise speed control of 3-phase AC motors. Its vector control technology uses direct torque control (DTC) to provide fast response and high accuracy. The galvanic isolation on the DC bus helps to protect the inverter against lightning or other high-voltage events. The onboard pulse-width modulation (PWM) control circuit can be used to fine-tune the motor performance. It also features a smart startup function which helps to limit the starting current and reduce wear on electric motors. The FC-051PK18S2E20H3XXCXXXSXXX comes standard with built-in overload protection, secure EMC filtering, and protection against overvoltage, undervoltage, and over-temperature.