V48SH05017NNFA

FEATURES High efficiency: 91.5% 5V/20A Size: 33.0x22.8x9.5mm (1.30x0.90x0.37) Industry standard footprint and pinout Fixed frequency operation SMD and through-hole versions Input UVLO OTP and output OCP, OVP Output voltage trim: -20%, +10% Monotonic startup into normal and pre-biased loads 1500V isolation and basic insulation No minimum load required No negative current during power or enable on/off ISO 9001, TL 9000, ISO 14001, QS 9000, OHSAS18001 certified manufacturing facility UL/cUL 60950-1 (US & Canada) Recognized th Delphi Series V48SH, 1/16 Brick 100W DC/DC Power Modules: 48V in, 5V, 20A out th OPTIONS The Delphi Series V48SH, 1/16 Brick, 48V input, single output, isolated DC/DC converter, is the latest offering from a world leader in power SMD pins systems technology and manufacturing Delta Electronics, Inc. This Short pin lengths available product family provides up to 100 watts of power or 40A of output current Positive remote On/Off th (1.8V and below) in an industry standard 1/16 brick form factor (1.30 x Heat spreader 0.90). The 5V output offers one of the highest output currents available and provides up to 91.5% efficiency at full load. With creative design technology and optimization of component placement, these converters possess outstanding electrical and thermal performance, as well as extremely high reliability under highly stressful operating conditions. All modules are protected from abnormal input/output voltage, current, and temperature conditions. For lower power needs, but in a similar small APPLICATIONS form factor, please check out Delta V36SE (50W), S48SP (36W or 10A) Optical Transport and S36SE (17W or 5A) series standard DC/DC modules. Data Networking Communications Servers DATASHEET DS V48SH05020 11222013 TECHNICAL SPECIFICATIONS (T =25C, airflow rate=300 LFM, V =48Vdc, nominal Vout unless otherwise noted.) A in PARAMETER NOTES and CONDITIONS V48SH05020 (Standard) Min. Typ. Max. Units ABSOLUTE MAXIMUM RATINGS Input Voltage Continuous 80 Vdc Transient (100ms) 100ms 100 Vdc Operating Temperature Refer to figure 20 for measuring point -40 121 C Storage Temperature -55 125 C Input/Output Isolation Voltage 1500 Vdc INPUT CHARACTERISTICS Operating Input Voltage 36 75 Vdc Input Under-Voltage Lockout Turn-On Voltage Threshold 32.5 34 35.5 Vdc Turn-Off Voltage Threshold 30.5 32 33.5 Vdc Lockout Hysteresis Voltage 1 2 3 Vdc Maximum Input Current 100% Load, 36Vin 4 A No-Load Input Current 50 80 mA Off Converter Input Current 7 12 mA 2 2 Inrush Current (I t) With 100uF external input capacitor 1 A s Start up Current Peak, Vin=36V, 100% Load, With 10000uF Co 3.8 5.7 A Input Terminal Ripple Current RMS, Vin=48V, With 100uF input cap. 0.1 0.15 A Input Reflected-Ripple Current P-P thru 12H inductor, 5Hz to 20MHz 8 15 mA Input Voltage Ripple Rejection 120 Hz 45 dB OUTPUT CHARACTERISTICS Output Voltage Set Point Vin=48V, Io=Io.max, Tc=25C 4.925 5.0 5.075 Vdc Output Voltage Regulation Over Load Io=Io, min to Io, max 5 mV Over Line Vin=36V to 75V 5 mV Over Temperature Tc=-40C to125C 50 mV Total Output Voltage Range Over sample load, line and temperature 4.85 5.15 V Output Voltage Ripple and Noise 5Hz to 20MHz bandwidth Peak-to-Peak Full Load, 1F ceramic, 10F tantalum 110 160 mV RMS Full Load, 1F ceramic, 10F tantalum 35 50 mV Operating Output Current Range 0 20 A Output Over Current Protection Output Voltage 10% Low 110 140 % DYNAMIC CHARACTERISTICS Output Voltage Current Transient 48V, 10F Tan & 1F Ceramic load cap, 0.1A/s Positive Step Change in Output Current 50% Io.max to 75% Io.max 100 160 mV Negative Step Change in Output Current 75% Io.max to 50% Io.max 100 160 mV Settling Time (within 1% Vout nominal) 100 200 us Turn-On Transient Start-Up Time, From On/Off Control 12 28 ms Start-Up Time, From Input 12 28 ms Cap ESR>=15mohm Maximum Output Capacitance 0 10000 F Full load 5% overshoot of Vout at startup EFFICIENCY 100% Load Vin=48V 90 91.5 % 60% Load Vin=48V 90 91.5 % ISOLATION CHARACTERISTICS Input to Output 1500 Vdc Isolation Resistance 10 M Isolation Capacitance 1500 pF FEATURE CHARACTERISTICS Switching Frequency 300 kHz ON/OFF Control, Negative Remote On/Off logic Logic Low (Module On) Von/off -0.7 0.8 V Logic High (Module Off) Von/off 2 15 V ON/OFF Control, Positive Remote On/Off logic Logic Low (Module Off) Von/off -0.7 0.8 V Logic High (Module On) Von/off 2 15 V ON/OFF Current (for both remote on/off logic) Ion/off at Von/off=0.0V 0.3 mA ON/OFF Current (for both remote on/off logic) Ion/off at Von/off=2V 10 uA Leakage Current (for both remote on/off logic) Logic High, Von/off=15V 50 uA Pout max rated power Output Voltage Trim Range -20 10 % Output Voltage Remote Sense Range Pout max rated power 10 % Output Over-Voltage Protection Over full temp range % of nominal Vout 130 % GENERAL SPECIFICATIONS MTBF Io=80% of Io, max Ta=40C, airflow rate=400FLM 1.4 M hours Weight Open frame 14.2 grams Over-Temperature Shutdown Refer to figure 20 for measuring point 128 C DS V48SH05020 11222013 2