C D Description: The 07595 premium toe grounder provides effective ESD protection. The cup is made from a black and non-marring rubber with inner tear resistant conductive scrim. The rubber is antistatic, low tribocharging, and dissipative. It removes charges when in contact with ESD protected floors. This foot grounder meets the less E 6 than 3.5 x 10 ohm requirement of ANSI ESD S20.20. This unit includes a two megohm molded external resistor, a conductive tab with carbon suffused fibers, and a D-ring fastening system. The product has been tested to ESD STM 97.2 - Floor Materials and Footwear Voltage Measurement in Combination with a Person. It is a suitable ESD footwear component in Flooring - Footwear System when used as the primary 7 grounding method (<3.5 x 10 ohms per ESD STM 97.1 Floor Materials and Footwear- Resistance Measurement in Combination with a Person.) A F Components: A. 0.060 thick, 1.50 wide, black conductive exterior with a non-marring interior. Tear B resistant nylon reinforced 4.3 oz. inner scrim layer prevents the rubber from tearing. 90P1 B. 3/8 wide, 30 long blue polyester tab contains electrically conductive carbon suffused fibers. C. 3/4 wide, blue loop material with return hook tip for quick and easy adjustment and wearer s comfort. LISTED D. 3/4 wide blue elastic material stretches for comfort. E. D-ring fastening system. F. A 1/4 watt, 2 megohm black molded external resistor. listed for safety and date coded. Made in America Tab to cup resistance: 6 7 10 - 10 Ohms 100 volts ITEM DESCRIPTION Note: Two heel straps are recommended for reliable grounding and ESD protection, 6 7 07595 Foot Ground, Toe, 2 megohm resistor, RTG: 10 - 10 Ohms providing ground when one foot is off the floor. Operator is grounded when foot is in contact with grounded dissipative or Our UL listed foot grounders are rated at 250 VAC. It is not recommended to use them where exposure conductive flooring. to line voltages above 250 VAC is possible. Caution: The foot grounder is for ESD control. It will not Desco recommends the use of foot ground tester item No. 19252 or 19253. reduce or increase your risk of receiving electric shock when using or working on electrical equipment. For additional information on the use and maintenance of foot grounders please ask for Technical Bulletins TB-2020 and TB-2040. FOOT GROUND, TOE, CONDUCTIVE Item 07595 is UL listed. DESCO WEST: 3651 WALNUT AVE., CHINO, CA 91710 WEB SITE: www.desco.com PHONE (909) 627-8178 FAX (909) 627-7449 DRAWING NUMBER DATE: DESCO EAST: 90 HUDSON RD, CANTON, MA 02021-1407 07595 8/07 PHONE (781) 821-8370 FAX (781) 575-0172 2007 DESCO INDUSTRIES INC. Employee OwnedX-ON Electronics Largest Supplier of Electrical and Electronic Components Click to view similar products for Antistatic Control Products category: Click to view products by Desco manufacturer: Other Similar products are found below : 13505 13870 14404 20-053-0017 2229 2231 3039 37061 39792 42470 XON-ASB4X30 XON-ASB4X6 XON-ASB6X30 09813 09857 XON-ASB8X10 XON-ASB6X10 19695 09037 68101 68103 73741 13515 13869 13868 13485 13457 13245 13332 13205 13135 91070 8031 8523 13080 13215 157 ROLL BEIGE 1.0 VERAX1R-300R 17260 66051 12550 19863 09121 73831 13340 13338 04541 19696 16104 SPI-20686