Product Data Sheet
Product Data Sheet
3M Metal-Out Static Shielding Bag 1500
This transparent metal-out static shielding bag is designed to provide a static safe
Physical Typical Value Testing Method
environment for sensitive electronic devices. Bags are printed with an ESD warning
Tensile Strength 4900 PSI, 34 MPa ASTM D882
symbol and a lot code for traceability. Open top and ZipTop styles are available. The
Puncture Resistance 10 lbs, 44 N MIL-STD-3010C Method 2065
bags are heat sealable.
Seal Strength 14 lbs, 62 N ASTM D882
3M Static Shielding Bags are manufactured from a top coat, metal, polyester,
Thickness 3 mils, .0762 mm +/-15% MIL-STD-3010C Method 1003
polyethylene laminate. The proprietary top coating is designed to protect the metal
Marking Adhesion Pass IPC-TM-650 2.4.1
layer. Polyester dielectric, in concert with the metal layer, is intended to provide
shielding of Electrostatic Discharge (ESD) and to help minimize the penetration of
Transparency 40% Tobias
electric field.
Electrical Typical Value Testing Method
ESD Shielding <10 nJ ANSI/ESD STM11.31
These bags are tested to meet or exceed certain electrical and physical requirements
11
of ANSI/ESD S541 and to be ANSI/ESD S20.20 program compliant. Bags are RoHS
Surface Resistance - <1x10 ohms ANSI/ESD STM11.11
Compliant* and lead-free**. Interior
6
Surface Resistance - <1x10 ohms ANSI/ESD STM11.11
Exterior
Static Decay < 2 seconds ETS 406D
Charge Retention <100 volts CPM-3M TP.21XX
3M Metal-Out Static
Shielding Bag1500
Cleanliness Typical Value Testing Method
Silicone Not Detected FTIR
Heat Sealing Conditions Typical Value
Temperature 300F 375F, 149C 190C
Time 0.5 3.5 seconds
Pressure 30 70 PSI, 206 482 KPa
This product is intended for commercial use only. This product is not on the Qualified Product Listing
under the Defense Standardization Progam.Product Data Sheet
Open Top Bag
ZipTop Bag
Open Top Bag ZipTop Bag
3M Metal-Out Static Shielding Bag 1500
3M Metal-Out Static Shielding Bags, Open Top 1500
Dimensions Part No. Dimensions Part No. Dimensions Part No.
(W x L in.) (W x L in.) (W x L in.)
3 x 5 15035 8 x 12 150812 12 x 18 1501218
4 x 6 15046 9 x 12 150912 14 x 18 1501418
5 x 8 15058 10 x 12 1501012 15 x 18 1501518
6 x 8 15068 10 x 14 1501014 16 x 24 1501624
6 x 10 150610 10 x 24 1501024 18 x 18 1501818
6 x 30 150630 11 x 15 1501115 18 x 24 1501824
7 x 15 150715 12 x 16 1501216
Standard sizes stocked fTolerance (inches): Width -0, +0.250 Lengor prompt shipment (usually same dath +/- 0.125 Oy). Tolerance (inches):set 0 to 0.250 ff Width -0, +0.250
Custom Sizes and Printing Available.
Width is measured from inside seam to inside seam.Seal width +/- 0.125
Length +/- 0.125 Offset 0 to 0.250
Length is measured from the top edge to the bottom fold. Seal width +/- 0.125
Opening is in the width dimension.
3M Metal-Out Static Shielding Bags, ZipTop 1500
Custom bag sizes, custom printing, and custom hot stamping
are available.
Dimensions Part No. Dimensions Part No. Dimensions Part No.
Most sizes are packed 100 per case.
(W x L in.) (W x L in.) (W x L in.)
Small sizes are packed 500 or 1,000 per case.
3 x 5 150Z35 6 x 8 150Z68 10 x 12 150Z1012
4 x 4 150Z44 6 x 10 150Z610 12 x 18 150Z1218
Important Notice
All statements, technical information, and recommendations related to 3Ms products
4 x 6 150Z46 8 x 10 150Z810 12 x 18 1911218
are based on information believed to be reliable, but the accuracy or completeness is not
guaranteed. Before using this product, you must evaluate it and determine if it is suitable for
Custom Sizes and Printing Available.
your intended application. You assume all risks and liability associated with such use. Any
3M is a trademark of 3M Compan y. All other trademarks are owned by their respective companies.
statements related to the product which are not contained in 3Ms current publications, or
any contrary statements contained on your purchase order shall have no force or effect unless
* RoHS 2011/65/EU Compliant means that the product or part does not contain any of the substances in excess of the maximum
concentration values (MCVs) in EU RoHS Directive 2011/65/EU. The MCVs are by weight in homogeneous materials. This expressly agreed upon, in writing, by an authorized officer of 3M.
information represents 3Ms knowledge and belief, which may be based in whole or in part on information provided by third party
suppliers to 3M.
Warranty; Limited Remedy; Limited Liability.
In the event any product is proven not to conform with 3Ms Regulatory Information, then 3Ms entire liability and Buyers exclusive
This product will be free from defects in material and manufacture for one year from the
remedy will be in accordance with the Warranty section.
time of purchase. 3M MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT
**Lead-free means that the product has less than 2 ppm of lead when tested by ICP-AES, with reference to EPA method
LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS
3051A/3052.
FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period
stated above, your exclusive remedy shall be, at 3Ms option, to replace or repair the 3M
product or refund the purchase price of the 3M product. Except where prohibited by law, 3M
3
will not be liable for any indirect, special, incidental or consequential loss or damage arising
from this 3M product, regardless of the legal theory asserted.
Electronic Solutions Division
Static Control Products
926 JR Industrial Drive
Sanford, NC 27332
Toll-Free: 866-722-3736
International: 919-718-0000 Please recycle. Printed in USA.
Email: 3mstaticinfo@mmm.com 3M 2014. All rights reserved.
www.3Mstatic.com 98-0799-1154-5 JHA