Description:
90P1
C
The High Visibility 3-Layer Non-Marring Foot Grounder features a bright yellow
rubber cup and neon green snap-loc strap. The three-layer cup has a non-
marring interior and exterior, and is reversible, providing extended life
expectancy. This unit is suitable for cleanrooms, as there is no exposed carbon. The High
LISTED
Visibility Heel Grounder includes a patented* two megohm flex flat resistor (24105 only), 8
strand conductive tab with carbon suffused fibers, and an adjustable snap-loc fastening
D
system. These units are UL listed. The product has been tested to ESD STM 97.2 - Floor
Materials and Footwear Voltage Measurement in Combination with a Person. It is a suitable ESD
footwear component in Flooring - Footwear System when used as the primary grounding method
7
(<3.5 x 10 ohms per ESD STM 97.1 Floor Materials and Footwear-Resistance Measurement in
Combination with a Person.)
E
Components:
A
A. 0.060 inch thick non-marring, solid, three layer, rubber material. Three layers
B
consist of a yellow dissipative outer layer with a textured grain, black
conductive inner layer, and a yellow dissipative outer layer. Will not mar floors
or shoes with black marks.
B. 3/8" wide, 30" long black polyester tab contains eight (8) electrically conductive carbon
suffused fibers.
C. 3/4" wide, neon green elastic material stretches for comfort.
D. Adjustable snap-loc fastening system.
E. Patented* two megohm flat flex resistor (24105 only).
Tab to cup resistance:
6 7
24104 - 10 - 10
6 7
24105 - 10 - 10
Note:
ITEM NO. DESCRIPTION
Two heel straps are recommended for reliable grounding and ESD
24104 Heel Grounder, without resistor, 30" tab
protection, providing ground when one foot is off the floor.
Made in America
24105 Heel Grounder, 2 megohm resistor, 30" tab
Operator is grounded when foot is in contact with grounded dissipative
or conductive flooring.
Our UL listed foot grounders are rated at 250 VAC. It is not recommended to use them where exposure to line
ESD Systems.com recommends the use of 41203, 41205,
voltages above 250 VAC is possible. Caution: The foot grounder is for ESD control. It will not reduce or increase your
41220/41213, and 41220/41226 foot ground testers. Ask for Tech
risk of receiving electric shock when using or working on electrical equipment.
Briefs PS-2057 and PS-2094.
For additional information on the use and maintenance of foot
grounders please ask for Tech Brief PS-2030.
Foot Grounder, Heel, Conductive, High Visibility, Non-Marring
No silicone is used in the materials that make our foot grounders.
432 NORTHBORO ROAD CENTRAL
DRAWING NUMBER DATE
Visit our online
MARLBORO, MA 01752 USA
library of Tech Drawings:
TEL. (508) 485-7390
TD-24104 07/05
X-ON Electronics
Largest Supplier of Electrical and Electronic Components
Click to view similar products for Antistatic Control Products category:
Click to view products by Desco manufacturer:
Other Similar products are found below :
13505 13870 14404 20-053-0017 2229 2231 3039 37061 39792 42470 XON-ASB4X30 XON-ASB4X6 XON-ASB6X30 09813 09857
XON-ASB8X10 XON-ASB6X10 19695 09037 68101 68103 73741 13515 13869 13868 13485 13457 13245 13332 13205 13135 91070
8031 8523 13080 13215 157 ROLL BEIGE 1.0 VERAX1R-300R 17260 66051 12550 19863 09121 73831 13340 13338 04541 19696
16104 SPI-20686