USER GUIDE TB-9039 Grounding Accessories 3000 Series Instruction Sheet To provide true common point grounding for all Your choice of four kits to meet workstation components, the kit 3047 offers a single-row, almost any grounding need six-terminal strip. No additional components offering resistance are in the path on any link of the static In any area where static-sensitive electronic components protection system. Hard grounds are available on the six or boards are handled, proper static protection is terminals. The system is easily accessible, and mounts on essential. A variety of static control devices is available any flat surface in new or existing workstation to meet the requirements necessary to protect both the environments. The protective cover is connected to electronics and the people handling them. But these ground via a one-megohm resistor for the maximum devices require proper grounding to perform their in personnel safety. In addition, three cable clips are functions. These four kits cover a variety of possible included to aid you in ground cord management. uses, from single-point grounding to multiple points connected to a common ground. They meet the technical requirements of ANSI/ESD S6.1 - Grounding. 3048 Wrist Strap/Table Mat Grounding 6 Double Studded System Screw Two wrist straps can be connected to the Wrist Strap/ Terminal Strip Table Mat Grounding System. The 15 foot (4.6 m) ground cord is connected directly to hard ground. Snapping the Grounding System to either of the two connectors in the corners of the table mat provides Wear Layer reliable, common point grounding for the wrist straps and the table mat simultaneously. Laminate Black Conductive Layer Wrist Strap/Table Mat Grounding System Figure 3. Installing the 3047 Common Point Grounding System (top). Laminate Wear Layer 3050 Snap Fastener Black Hole A Conductive Layer Dissipative Table Mat Terminal Strip Hole B Figure 1. 3048 Wrist Strap/Table Mat Grounding System. 6 Double Studded Screw Cover 3047 Common Point Grounding System Figure 4. Installing the 3047 Common Point Grounding System (bottom). Figure 2. 3047 Common Point Grounding System. SCS - 926 JR Industrial Drive, Sanford, NC 27332 East: (919) 718-0000 West: (909) 627-9634 Website: StaticControl.com 2020 DESCO INDUSTRIES INC TB-9039 Page 1 of 2 May 2020 Employee Owned3042 Wrist Strap Grounding System Figure 5. 3042 Wrist Strap Grounding System. Grounding of two wrist straps using a common point to Figure 8. Installation of the 3044 Laminate Grounding ground is possible with the system 3042. It is easy to System. identify for this purpose, with a clearly visible ground symbol. Compact in size, it mounts to any flat surface where a wrist strap needs to be connected to a reliable ground. The kit may be mounted on new workstations or A retrofitted onto any existing workstation. Components of the kit include one static dissipative engineering grade B plastic housing, one 10-foot (3 m) grounding cord with multi stud ring terminal, strain relief for the grounding C cord, two banana jacks built into the housing, and two 8 D galvanized, self-tapping Phillips screws. F E Solderless Table Top Ground Wire Cable Clip A. 8-32-1 Cap screw D. Ring Terminal B. Brass insert 1/2 dia. E. 8-32 Nut 8 x 1 1/2 C. 1/2 dia. flat washer F. Bench Mounted Ground with 2 Banana Jacks Ground Self-tapping Phillips Receptacle Head Screws Figure 9. Component Parts and Installation of the Flush Mount Inserts and the Flush Mount Laminate Ground Figure 6. Installing 3042 Wrist Strap Grounding System. Insert. Important Notice 3044 Laminate Grounding System Before using this product, you must evaluate it and To properly ground a workstation with Static Protective determine if it is suitable for your intended application. Hard Laminate, this kit gives you a choice of four methods You assume all risks and liability associated with such to provide proper grounding. This can be accomplished use. from the top or the bottom of the work surface. Contents of the kit include the hardware needed to establish reliable connections to ground. Limited Warranty, Warranty Exclusions, Limit of Liability and RMA Request Instructions See the SCS Warranty - StaticControl.com/Limited-Warranty.aspx Figure 7. 3044 Laminate Grounding System. SCS - 926 JR Industrial Drive, Sanford, NC 27332 East: (919) 718-0000 West: (909) 627-9634 Website: StaticControl.com 2020 DESCO INDUSTRIES INC TB-9039 Page 2 of 2 Employee Owned