TECHNICAL BULLETIN TB-4015 Series II Fume Extraction System Powerful, Portable Fume Extraction The MENDA Series II Fume Extraction System is a two-arm filtration system that combines powerful fan performance with efficient filtration. The compact design and easy set-up makes it truly portable. Depending on the application, three filter configurations are offered: The standard item (35470) comes with a 95% efficient Non-HEPA filtration for solder fumes. You also have the option of purchasing a HEPA filter (35472) or a Deep Bed Gas Filter (35473) for the removal of gases from solvents, conformal coating, etc. The air inlet ports allow the connection of 50 mm (2 ) or 63 mm (2.5 ) diameter exhaust arms. Inspection Item Description 35470 Series II Fume Extractor,w/ Non-HEPA Filter 35471 Pre-Filter (5PK), for use with (HEPA Filter, Gas Filter Only) 35472 Main Filter, HEPA 99.97% / Carbon 35473 Deep Bed Gas Filter 99.97% 35474 Main Filter, Non HEPA 95% 35475 2.5 Arm w/6 Hose & Bracket 35476 Arm w/Bracket, Clamps 35477 Flex Exhaust Arm 2.5 35478 Flex Exhaust Arm 5 35479 Table Bracket, Clamps 35480 Connect Hose, 6 35470 35481 Connect Hose, 12 35482 Remote SW, Series II Items included with model 35470: 1 Unit with 35474 filter installed 1 Remote Start/Stop Button (35482) 1 Power Cord, 120V US Plug 2 Flex Exhaust Arms 5 (35478) 3651 Walnut Avenue, Chino, CA 91710 Phone: (909) 627-2453 Web Site: MendaPump.com 2016 DESCO INDUSTRIES INC. TB-4015 July 2016 Page 1 of 5 Employee OwnedInstallation Extractor Installation Procedure Remove Fume Extractor from the shipping carton and inspect for any damages. Make sure you have access to the unit for filter maintenance. Connect the power cord into the outlet on the side of the system. Plug the power cord into a grounded wall socket. Connect the arms/hose to the inlet on the base of the fume extractor. To power up system, depress the power switch, located on the bottom right of the unit. The operator can expect a delay of a few seconds before hearing the motor running. This is due to the built-in motor Soft-start feature. If utilized, connect the supplied remote Start/Stop switch to the system and site the switch in a convenient position on the workbench. We recommend that this switch be used for your convenience. Position the extraction arms to optimize fume capture. Follow maintenance procedures on next page. Caution To provide protection against the risk of electrical shock, connect to properly grounded outlets only. Features Efficient motor with soft-start feature Optional, remote Start/Stop switch Audible alarm to indicate blocked filters Low noise level <55 dba High suction force and airflow Compact and portable Standard Filter Efficiency at 95% (35474) Connects to 50mm (2 ) or 63mm(2.5 ) hoses or exhaust arms ESD safe housing Optional HEPA Filter Available (35472) Optional Gas Filter Available (35473) 3651 Walnut Avenue, Chino, CA 91710 Phone: (909) 627-2453 Web Site: MendaPump.com 2016 DESCO INDUSTRIES INC. TB-4015 Page 2 of 5 Employee Owned