Moisture Barrier Bag Dri-Shield 2000
Made in the
This aluminized moisture barrier bag is designed to provide packaging for ESD
United States of America
and moisture sensitive items, both inside and outside an ESD protected area.
Meets ANSI/ESD S20.20, Packaging standard ANSI/ESD S541, and Static Control Bag
The bags are heat sealable and suitable for vacuum packaging. Bags are
ANSI/ESD S11.4 Level 3 (except Transparency)
printed with ESD and moisture warning symbols and a lot code for traceability.
Physical Typical Value Testing Method
Moisture Vapor <0.035 grams/100 sq. in./24 hrs MIL-STD-3010C Method 3030
SCS Moisture Barrier Bags Dri-Shield 2000 are manufactured from a
Transmission Rate
laminate of multiple layers of aluminized polyester and polyethylene. Polyester
(MVTR)
provides puncture resistance. Metal layers are intended to provide shielding of
Electrostatic Discharge (ESD) and to help minimize the penetration of electric
Tensile Strength 7800 PSI, 54 MPa ASTM D882
field while providing moisture protection.Open Top Bag
ZipTop Bag
Puncture Resistance 20 lbs, 89 N MIL-STD-3010 Method 2065
Seal Strength 15 lbs, 66 N ASTM D882
Thickness 3.6 mils, 0.0914 mm 10% MIL-STD-3010 Method 1003
Marking Adhesion Pass IPC-TM-650 2.4.1
Electrical Typical Value Testing Method
ESD Shielding <10 nJ ANSI/ESD STM11.31
4 11
Surface Resistance - ANSI/ESD STM11.11
1 x 10 to < 1 x 10 ohms
Tolerance: Width -0, +1/4"
Interior
Length 1/8" Offset 0 to 1/4"
Seal width 3/8" with a tolerance of 1/8"
4 11
Surface Resistance - ANSI/ESD STM11.11
1 x 10 to < 1 x 10 ohms
Exterior
Note: Standard bag markings shown
above are not to scale.
EMI Attenuation 45 dB 1 to 10 GHz
Cleanliness Typical Value Testing Method
Silicone Not Detected FTIR
Heat Sealing Conditions Typical Value
Temperature 300F - 400F, 140C - 204C
Tolerance (inches): Width -0, +0.250 Length +/- 0.125 Oset O to 0.250 ff
Time 0.6 4.5 seconds
Seal width +/- 0.125
Pressure 30 70 PSI, 206 482 KPa
Bag is free of amines, silicones and heavy metals.
This product is intended for commercial use only. This product is not on the Qualified Product
Listing under the Defense Standardization Program.
NOTE: The complete dry package concept of packaging for electronics requires three elements:
Moisture Barrier Bags - To Protect
SCS Moisture Barrier Bags are packaged in a polyethylene bag.
Desiccants - To Absorb Moisture
RoHS 2, REACH, and Conflict Minerals Statement
Humidity Indicator Cards - To Monitor Performance
None of the RoHS 2 restricted materials or REACH substances of very high concern as
of 2017/01/12, or Conflict Minerals are intentionally added in manufacturing this product.
Specifications and procedures subject to change without notice.
Ref: European Union Directive 2011/65/EU and Regulation (EC) No. 1907/2006/CE.
See SCS Warranty, Limitation of Liability and Remedies
DRI-SHIELD 2000 MOISTURE BARRIER BAG
DRAWING
DATE
926 JR Industrial Drive, Sanford, NC 27332
WEB SITE: StaticControl.com NUMBER
April
PHONE (919) 718-0000
2017
Dri-Shield 2000
2017 DESCO INDUSTRIES INC.
Employee Owned