Product Data Sheet Product Data Sheet 3M Static Control Vinyl Floor Tile 8400 Series The need for static protection to drain electrostatic charges from personnel and materials is well accepted in many industries. Whether safeguarding sensitive electronic components during manufacture or service or helping control charge in a computer room or munitions factory, a key element of an ESD (electrostatic discharge) prevention program is the use of a properly designed flooring system. Description Static Control Vinyl Floor Tile 8400 Series is a long-term solution for helping control ESD. This solid vinyl tile is durable and attractive and can easily be installed by competent flooring contractors. The flexible, resilient tiles are made with only 100% pure vinyl and contain a minimum amount of filler and none of the regrind that can make tile brittle. Both the conductive and static-dissipative versions are available in a selection of bright, vivid colors. A proprietary manufacturing process completely seals in the conductive carbon medium, resulting in a unique tile that can be easily cleaned and shined to a gloss while maintaining its electrical properties without the use of an ESD wax or polish. Key Features Lifetime warranty on electrical performance 10-year limited warranty on materials Long-term ESD protection Excellent wear resistance and durability Easy, low-cost maintenance Made with 100% pure homogeneous vinyl no regrind Micro-edged for squareness for ease of installation Available in either conductive or static-dissipative resistance range Available in 24.25 size for raised access floors, plus 12 and 24 sizes. Available in a variety of colors May be seamwelded or self-covedProduct Data Sheet Product Data Sheet 3M Static Control Vinyl Floor Tile 8400 Series Available Floor Tile Colors Specifications Static-Dissipative (S.D.): Series 8411 through 8427 Mechanical Properties Typical Conductive (Cond.): Series 8431 through 8447 Static-Dissipative Floor Tile (Series 8411-8427) Conductive Floor Tile (Series 8431-8447) Brown White Gray Blue 8411 (S.D.) or 8431 (Cond.) 8412 (S.D.) or 8432 (Cond.) 8413 (S.D.) or 8433 (Cond.) 8414 (S.D.) or 8434 (Cond.) Flammability Flame Spread Index Meets Class 1 requirements ASTM E84 2 Critical Radiant Flux > 1.1w/cm (ASTM E648) Physical Specifications Meets ASTM F1700-13A Abrasion Resistance (ASTM D 3389) Pass Taber H22 wheel Electrical Properties Typical Typical Green Maroon Black Reverse Brown Static Dissipative Tile (8413- Conductive Tile (8431-8447) 8415 (S.D.) or 8435 (Cond.) 8416 (S.D.) or 8436 (Cond.) 8417 (S.D.) or 8437 (Cond.) 8421 (S.D.) or 8441 (Cond.) 8427) 6 9 4 6 Electrical Resistance 1 x 10 to 1 x 10 ohms 2.5 x 10 to 1 x 10 ohms ANSI/ESD STM7.1 and ANSI/ESD STM97.1 Static Generation (Walking Voltage) < 50 volts < 25 volts Testing done per ANSI/ESD STM97.2 Testing done per ANSI/ESD STM97.2 (with 3M Shoe Grounder Assembly 2051 at 12% RH (+/-3% RH at 73 degrees F +/-2 degrees) (With ESD Control Rated Shoes <35 Reverse Gray Reverse Blue Reverse Green Reverse Black megohms per ANSI/ESD STM9.1 and 8423 (S.D.) or 8443 (Cond.) 8424 (S.D.) or 8444 (Cond.) 8425 (S.D.) or 8445 (Cond.) 8427 (S.D.) or 8447 (Cond.) ANSI/ESD STM97.1) Sizes 0.125 x 12 x 12 in. (3.2 x 305 x 305 mm) 0.125 x 24.25 x 24.25 in. (3.2 x 615 x 615 mm) for raised access floor panels 0.125 x 24 x 24 in. (3.2 x 610 x 610 mm) for seamwelded installations