Product Data Sheet Product Data Sheet 3M Heel Grounder HGS1M Standard Style Specifications Typical Value The Heel Grounder HGS1M, Standard Style, provides a conductive sole under the heel, and Hook and Loop 3/4 a stretch-nylon strap around the back of the shoe. This quality grounder features a durable two-layer sole, lot number and 23-inch multi-strand ribbon. Heel Grounders are designed Elastic Strap Black and manufactured for comfort, durability and cost effectiveness. Heel grounders are UL Sole Interior Non-marking listed for safety and tested for electrical performance. 5 Sole Exterior <10 ohms Hook and Loop Strap 6 Total Grounder* 1.0 x 10 ohms *Meets the requirements of ANSI/ESD S20.20-2007, EIA 625 *ESD-SP9.2 Nylon Strap Part Numbers HGS1M Standard Heel Grounder, 1 meg resistor How Heel Grounders Work 23 Conductive Ribbon Heel grounders eliminate a charge on a person by electrically connecting the person to a grounded surface. A conductive ribbon placed inside the wearers shoe or sock makes 2-layer Rubber Sole electrical contact with the skin through perspiration. The assembly contains a current- limiting resistor which protects the operator from accidental exposure to electricity. Heel grounders must be worn on both feet to maintain ground contact while walking. WARNING: All 3M Shoe Grounding Straps and 3M is a trademark of 3M Company. All other trademarks are owned by their respective companies. Assemblies should not be used in areas Important Notice where the individual All statements, technical information, and recommendations related to 3Ms products may come in contact are based on information believed to be reliable, but the accuracy or completeness is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for with electrical your intended application. You assume all risks and liability associated with such use. Any circuitry exceeding statements related to the product which are not contained in 3Ms current publications, or any contrary statements contained on your purchase order shall have no force or effect unless 250 volts. expressly agreed upon, in writing, by an authorized officer of 3M. 3 Warranty Limited Remedy Limited Liability. Electronics Materials Solutions Division This product will be free from defects in material and manufacture for one year from the Static Control Products time of purchase. 3M MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT 926 JR Industrial Drive LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS Sanford, NC 27332-9733 FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period Toll-Free: 866-722-3736 stated above, your exclusive remedy shall be, at 3Ms option, to replace or repair the 3M International: 919-718-0000 Please recycle. Printed in USA. product or refund the purchase price of the 3M product. Except where prohibited by law, Email: 3mstaticinfo mmm.com 3M 2014. All rights reserved. 3M will not be liable for any indirect, special, incidental or consequential loss or damage www.3Mstatic.com 78-9102-1623-9 JHA arising from this 3M product, regardless of the legal theory asserted.