Product Data Sheet Product Data Sheet 3M Sole Grounder SG1M Specifications Typical Value Full Coverage Hook and Loop 3/4 Black The Sole Grounder SG1M provides maximum floor contact by covering both the ball of D-Ring 2 the foot and the heel. Three elastic straps create a comfortable secure fit. This quality grounder is tested for electrical performance and is lot numbered for QC traceability. Elastic Strap 3/4 Black 5 Sole Exterior <10 ohms 6 Total Grounder* 1.1 x 10 ohms Elastic Hook and Loop Strap *Meets the requirements of ANSI/ESD S20.20-2014, EIA 625 *ESD-SP9.2 18 Conductive Ribbon Elastic Hook and Loop Part Numbers SG1M-S Small Sole Grounder, 1 meg resistor SG1M-M Medium Sole Grounder, 1 meg resistor SG1M-L Large Sole Grounder, 1meg resistor D-rings for Complete Adjustability 2-layer Sole for Durability SG1M-XL Extra Large Sole Grounder, 1 meg resistor How Sole Grounders Work Sole grounders eliminate a charge on a person by electrically connecting the person to WARNING: a grounded surface. A conductive ribbon placed inside the wearers shoe or sock makes All 3M Shoe electrical contact with the skin through perspiration. The assembly contains a current- Grounding Straps and limiting resistor which protects the operator from accidental exposure to electricity. Sole Assemblies should grounders must be worn on both feet to maintain ground contact while walking. not be used in areas 3M is a trademark of 3M Company. All other trademarks are owned by their respective companies. where the individual may come in contact Important Notice All statements, technical information, and recommendations related to 3Ms products with electrical are based on information believed to be reliable, but the accuracy or completeness is not circuitry exceeding guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated with such use. Any 250 volts. statements related to the product which are not contained in 3Ms current publications, or any contrary statements contained on your purchase order shall have no force or effect unless expressly agreed upon, in writing, by an authorized officer of 3M. 3 Warranty Limited Remedy Limited Liability. Electronics Materials Solutions Division This product will be free from defects in material and manufacture for one year from the Static Control Products time of purchase. 3M MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT 926 JR Industrial Drive LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS Sanford, NC 27332-9733 FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period Toll-Free: 866-722-3736 stated above, your exclusive remedy shall be, at 3Ms option, to replace or repair the 3M International: 919-718-0000 Please recycle. Printed in USA. product or refund the purchase price of the 3M product. Except where prohibited by law, Email: 3mstaticinfo mmm.com 3M 2014. All rights reserved. 3M will not be liable for any indirect, special, incidental or consequential loss or damage www.3Mstatic.com 78-9102-1613-0 JHA arising from this 3M product, regardless of the legal theory asserted.