74LVC1G125QW5-7

74LVC1G125Q SINGLE BUFFER GATE WITH 3-STATE OUTPUT Description Pin Assignments The 74LVC1G125Q is an automotive-compliant single, non-inverting buffer/bus driver with a 3-state output. The output enters a high- impedance state when a HIGH level is applied to the output enable ( Top View ) (OE) pin. The device is designed for operation with a power supply range of 1.65V to 5.5V. The inputs are tolerant to 5.5V, allowing this OE 1 5 Vcc device to be used in a mixed-voltage environment. The device is fully specified for partial power-down applications using I . The I OFF OFF A 2 circuitry disables the output preventing damaging current backflow when the device is powered down. 4 GND 3 Y SOT25 / SOT353 Applications Features Grade 1 Ambient Temperature Operation: -40C to +125C Voltage Level Shifting Wide Supply Voltage Range from 1.65V to 5.5V General Purpose Logic 24mA Output Drive at 3.3V Power Down Signal Isolation CMOS Low Power Consumption Wide Array of Products such as: IOFF Supports Partial Power-Down Mode Operation Automotive Applications within Grade 1 Temperature Range Inputs Accept up to 5.5V Regardless of VCC Level Industrial Computing/Controls/Automation ESD Protection Tested per AEC-Q100 High Reliability Networking/Communications Exceeds 2000V Human Body Model (AEC-Q100-002) Industrial/Agricultural Equipment Exceeds 1000V Charged Device Model (AEC-Q100-011) Latch-Up Exceeds 100mA (AEC-Q100-004) Totally Lead-Free & Fully RoHS Compliant (Notes 1 & 2) Halogen and Antimony Free. Green Device (Note 3) The 74LVC1G125Q is suitable for automotive applications requiring specific change control this part is AEC-Q100 qualified, PPAP capable, and manufactured in IATF 16949 certified facilities. 74LVC1G125Q Pin Descriptions Logic Diagram Pin Name Description Output Enable Active LOW OE 1 A Data Input OE GND Ground Y Data Output 2 4 A Y V Supply Voltage CC Function Table Inputs Output A Y OE L H H L L L H X Z Absolute Maximum Ratings (Notes 4 & 5) Symbol Description Rating Unit ESD HBM Human Body Model ESD Protection 2 kV ESD CDM Charged Device Model ESD Protection 1 kV Supply Voltage Range -0.5 to 6.5 V VCC Input Voltage Range -0.5 to 6.5 V VI V Voltage Applied to Output in High Impedance or I State -0.5 to 6.5 V O OFF V Voltage Applied to Output in High or Low State -0.5 to V + 0.5 V O CC I Input Clamp Current V < 0 -50 mA IK I I Output Clamp Current -50 mA OK I Continuous Output Current 50 mA O I , I Continuous Current Through V or GND 100 mA CC GN CC Operating Junction Temperature -40 to +150 C TJ Storage Temperature -65 to +150 C TSTG Notes: 4. Stresses beyond the absolute maximum can result in immediate failure or reduced reliability. These are stress values and device operation should be within recommend values. 5. Forcing the maximum allowed voltage could cause a condition exceeding the maximum current or conversely forcing the maximum current could cause a condition exceeding the maximum voltage. The ratings of both current and voltage must be maintained within the controlled range. 2 of 10 74LVC1G125Q June 2020 Diodes Incorporated www.diodes.com Document number: DS39797 Rev. 2 - 2