AP2301A/AP2311A 2.0A SINGLE CHANNEL CURRENT-LIMITED POWER SWITCH Description Pin Assignments The AP2301A and AP2311A are single channel, current-limited, (Top View) integrated high-side power switches optimized for Universal Serial Bus (USB) and other hot-swap applications. The family of devices 1 8 GND NC complies with USB standards and is available with both polarities of IN 2 7 OUT Enable input. IN 3 6 OUT The devices have fast short-circuit response time for improved overall EN 4 5 FLG system robustness, and have integrated output discharge function to ensure completely controlled discharging of the output voltage SO-8 capacitor. They provide a complete protection solution for applications subject to heavy capacitive loads and the prospect of short circuit, ( Top View ) and offer reverse current blocking, over-current, over-temperature 1 8 GND NC and short-circuit protection, as well as controlled rise time and under- 7 IN 2 OUT voltage lockout functionality. A 7ms deglitch capability on the open- 6 IN 3 OUT drain Flag output prevents false over-current reporting and does not 4 EN 5 FLG require any external components. MSOP-8 /MSOP-8EP Note: latter with exposed pad All devices are available in SO-8, MSOP-8, MSOP-8EP, U-DFN3030- (dotted line) 8 (Type E) and U-DFN2020-6 packages. (Top View) Features Single Channel Current-Limited Power Switch Output Discharge Function Fast Short-Circuit Response Time: 2s 2.5A Accurate Current Limiting Reverse Current Blocking U-DFN3030-8 (Type E) 70m on-Resistance Input Voltage Range: 2.7V to 5.5V (Top View) Built-in Soft-Start with 0.6ms Typical Rise Time Over-Current and Thermal Protection Fault Report (FLG) with Blanking Time (7ms Typ) ESD Protection: 2kV HBM, 200V MM Ambient Temperature Range: -40C to +85C SO-8, MSOP-8, MSOP-8EP, U-DFN3030-8 (Type E) and U-DFN2020-6: Available in Green Molding Compound (No Br, U-DFN2020-6 Sb) Totally Lead-Free & Fully RoHS Compliant (Notes 1 & 2) Halogen and Antimony Free. Green Device (Note 3) Applications UL Recognized, File Number E322375 LCD TVs & Monitors IEC60950-1 CB Scheme Certified Set-Top-Boxes, Residential Gateways Laptops, Desktops, Servers, e-Readers, Printers, Docking Stations, HUBs Notes: 1. No purposely added lead. Fully EU Directive 2002/95/EC (RoHS), 2011/65/EU (RoHS 2) & 2015/863/EU (RoHS 3) compliant. 2. See AP2301A/AP2311A Typical Applications Circuit Enable Active High IN Load Power Supply OUT 2.7V to 5.5V 0.1F 0.1F 10k 120F FLG EN GND ON OFF Available Options Recommended Maximum Typical Current Part Number Channel Enable Pin (EN) Package Continuous Load Current (A) Limit (A) SO-8 AP2301A 1 Active Low MSOP-8 2A 2.5A MSOP-8EP U-DFN3030-8 (Type E) AP2311A 1 Active High U-DFN2020-6 Pin Descriptions Pin Number Pin MSOP-8EP, Function SO-8, Name U-DFN3030-8 U-DFN2020-6 MSOP-8 (Type E) GND 1 1 2 Ground Voltage Input Pin Connect a 0.1F or larger ceramic capacitor from IN to GND as close IN 2, 3 2, 3 1 as possible. (all IN pins must be tied together externally) EN 4 4 3 Enable input, active low (AP2301A) or active high (AP2311A) Over-temperature and over-current fault reporting with 7ms deglitch active low open- FLG 5 5 4 drain output. FLG is disabled for 7ms after turn-on. OUT 6, 7 6, 7 5 Voltage Output Pin All OUT pins must be tied together externally. NC: NC 8 8 6 No Internal Connection recommend tie to OUT pins Exposed pad. Exposed Exposed Exposed It should be externally connected to GND and thermal mass for enhanced thermal Pad Pad Pad impedance. It should not be used as electrical ground conduction path. 2 of 17 AP2301A/AP2311A February 2018 Diodes Incorporated www.diodes.com Document number: DS37743 Rev. 2 - 2