Thread undercut acc. to DIN 76-B Material acc. to DIN 176: 11 SMn Pb30 2 Minimum tensile strength: 500 N/mm Surface nish acc. to DIN 267: galvanised (A3 F) Material number: 1.0718 Tolerance for length dimensions +/- 0.1 mm (DIN 2768-m applies to SW13) -- All articles are also available without undercut. Available from stock. Delivery times for intermediate lengths and special versions upon request. Standard range spacer bolts Zinc, plated EXECUTION DIA Internal / external thread Internal thread lengths mm External thread lengths mm L L2 at L2 at L2 at L2 at G1=G2 L3 M2.5M5 M2 M6 M8 5 3 3 M2 5 8 5 5 M2,5 6 10 6 6 6 M3 6 12 7 6 7 M4 8 15 10 6 10 10 M5 8 18 10 6 10 M6 10 from 20 10 6 12 14 M8 14 Order No. Execution Material SW* (hexagon) Thread Standard lengths in mm 221 x (length) DIA Steel SW4 M2 5, 8, 10, 12, 15, 18, 20, 25, 30, 35, 40 2212 x DIA Steel SW4 M2.5 5, 8, 10, 12, 15, 18, 20, 25, 30, 35, 40 223 x DIA Steel SW5 M3 5, 8, 10, 12, 15, 18, 20, 25, 30, 35, 40, 45, 50 224 x DIA Steel SW5.5 M3 5, 8, 10, 12, 15, 18, 20, 25, 30, 35, 40, 45, 50, 55, 60, 65, 70 225 x DIA Steel SW6 M3 5, 8, 1 0, 12, 15, 18, 20, 25, 30, 35, 40, 45, 50, 55, 60, 65, 70, 75, 80, 85, 90, 95, 100 226 x DIA Steel SW7 M4 5, 8, 1 0, 12, 15, 18, 20, 25, 30, 35, 40, 45, 50, 55, 60, 65, 70, 75, 80, 85, 90, 95, 100 227 x DIA Steel SW8 M4 5, 8, 1 0, 12, 15, 18, 20, 25, 30, 35, 40, 45, 50, 55, 60, 65, 70, 75, 80, 85, 90, 95, 100 228 x DIA Steel SW8 M5 8, 1 0, 12, 15, 18, 20, 25, 30, 35, 40, 45, 50, 55, 60, 65, 70, 75, 80, 85, 90, 95, 100 229 x DIA Steel SW10 M6 1 0, 12, 15, 18, 20, 25, 30, 35, 40, 45, 50, 55, 60, 65, 70, 75, 80, 85, 90, 95, 100 2213 x DIA Steel SW13 M8 1 5, 20, 25, 30, 35, 40, 45, 50, 55, 60, 65, 70, 75, 80, 85, 90, 95, 100 *SW: width across ats Ordering example: 229 x 50 = DIA / St / SW10 / M6 x 50 9 E-Mail: mail dremec.de Internet: www.dremec.de Portal: www.dremec.netX-ON Electronics Largest Supplier of Electrical and Electronic Components Click to view similar products for Standoffs & Spacers category: Click to view products by Dremec manufacturer: Other Similar products are found below : M0516-3-N M0518-3-N M0521-3-N M0524-3-N M0532-35-N M0543-4-AL M0544-3-N M0545-3-AL M0553-3-N M0564-4-N M0608-5- SS M0609-5-SS M0610-35-AL M0613-3-N M0653-35-N M0654-4-SS M0655-5-AL M0660-4-AL M0660-4-N M0670-35-N M0671-5-N M0671-5-SS M0722-5-N M0725-6-N M0731-4-N M0904-B-25-AL M1273-2545-AL M1273-3005-AL M1274-3005-AL M1303-3506-AL M1307-3506-AL M1313-3005-N M1313-4007-AL M1314-3005-AL M1314-3005-SS M1315-3005-SS M1315-4007-N M1317-3506-AL M1317-4007-SS M1318-3005-SS M1320-3005-AL M1320-3005-N M1321-3005-SS M1321-4007-AL M1322-4007-N M1324-3005-N M1326-3005-AL M1326-4007-SS M1331-4007-SS M1577-B-4007-B