REVISIONS LTR DESCRIPTION DATE (YR-MO-DA) APPROVED A Changes IAW NOR 5962-R075-94 jak. 93-12-22 Monica L. Poelking B Changes IAW NOR 5962-R129-94 -tvn. 94-03-21 Monica L. Poelking C Changes IAW NOR 5962-R224-96 -bjm. 96-09-30 Thomas M. Hess D Incorporate NORs, notice of revisions, into the drawing. Update the boilerplate 08-01-28 Thomas M. Hess to the current requirements of MIL-PRF-38535. - jak E Add footnote 8/ to I in table I. - jak 10-03-22 Muhammad A. Akbar CC REV SHEET REV E E E E E SHEET 15 16 17 18 19 REV STATUS REV E E E E E E E E E E E E E E OF SHEETS SHEET 1 2 3 4 5 6 7 8 9 10 11 12 13 14 PMIC N/A PREPARED BY DEFENSE SUPPLY CENTER COLUMBUS Jeffery Tunstall COLUMBUS, OHIO 43218-3990 1. SCOPE 1.1 Scope. This drawing documents two product assurance class levels consisting of high reliability (device classes Q and M) and space application (device class V). A choice of case outlines and lead finishes are available and are reflected in the Part or Identifying Number (PIN). When available, a choice of Radiation Hardness Assurance (RHA) levels is reflected in the PIN. 1.2 PIN. The PIN is as shown in the following example: 5962 - 92210 01 M E A Federal RHA Device Device Case Lead stock class designator type class outline finish designator (see 1.2.1) (see 1.2.2) designator (see 1.2.4) (see 1.2.5) / (see 1.2.3) / Drawing number 1.2.1 RHA designator. Device classes Q and V RHA marked devices meet the MIL-PRF-38535 specified RHA levels and are marked with the appropriate RHA designator. Device class M RHA marked devices meet the MIL-PRF-38535, appendix A specified RHA levels and are marked with the appropriate RHA designator. A dash (-) indicates a non-RHA device. 1.2.2 Device type(s). The device type(s) identify the circuit function as follows: Device type Generic number Circuit function 01, 02 54FCT163T 4-bit presettable binary counters with synchronous reset, TTL compatible inputs and limited output voltage swing 03, 04 54FCT163AT 4-bit presettable binary counters with synchronous reset, TTL compatible inputs and limited output voltage swing 05, 06 54FCT163CT 4-bit presettable binary counters with synchronous reset, TTL compatible inputs and limited output voltage swing 1.2.3 Device class designator. The device class designator is a single letter identifying the product assurance level as follows: Device class Device requirements documentation M Vendor self-certification to the requirements for MIL-STD-883 compliant, non-JAN class level B microcircuits in accordance with MIL-PRF-38535, appendix A Q or V Certification and qualification to MIL-PRF-38535 1.2.4 Case outline(s). The case outline(s) are as designated in MIL-STD-1835 and as follows: Outline letter Descriptive designator Terminals Package style E GDIP1-T16 or CDIP2-T16 16 Dual-in-line F GDFP2-F16 or CDFP3-F16 16 Flat pack 2 CQCC1-N20 20 Square leadless chip carrier 1.2.5 Lead finish. The lead finish is as specified in MIL-PRF-38535 for device classes Q and V or MIL-PRF-38535, appendix A for device class M. SIZE STANDARD 5962-92210 A MICROCIRCUIT DRAWING DEFENSE SUPPLY CENTER COLUMBUS REVISION LEVEL SHEET COLUMBUS, OHIO 43218-3990 E 2 DSCC FORM 2234 APR 97