111683

www.eaton.com www.moeller.net CS Wall-Mounted Sheet Steel Enclosures with Mounting Plate Product InformationCS Wall-Mounted Sheet Steel Enclosures Technical features at a glance Rainwater drain profile Prevents liquids (such as water or oil) and dirt from penetrat- ing when opening the door. Available in 45 sizes ... from 250x200x150 mm to 1200x1200x250 mm The stable CS enclosures series made of solid sheet steel is ideal RAL7035 wherever an effective protection against direct contact with live Surface and corrosion protec- parts is required. The high degree of protection (IP66) not only pro- tion through a rough-type vides full protection against most adverse environmental condi- powder-coating inside and out, tions, but also protects the systems and equipment inside the RAL 7035. enclosures against their harmful consequences. Tightness is guaranteed through a continuously foamed polyurethane sealing. An all-around rainwater drain profile prevents liquids (such as water or oil) and dirt from penetrating when open- ing the door. Shock resistance rating is IK09 according to EN 62262, hence the inside equipment of the enclosures is also protected against Mounting plate mechanical impacts. CS enclosures can be installed as wall-mount- Galvanized sheet steel ed enclosures. A rough-type paint applied in the powder-coating 2 - 3 mm thick for safe installa- method provides for non-abrasive corrosion protection. tion of switchgear and basic EMC protection. The door of the enclosure is easy to remove in case any further mechanical work needs to be carried out. Concealed inside hinges according quick-change technology are easy to remove for this pur- pose and provide for quick and easy reversal of the hinging from left to right and vice-versa. wa vt00309 Flange plate With coextruded seal, sSheet steel for own production. The enclosure can be turned by 180 for cable insertion at the top or bottom. 2